Cam walked back after rebuild?? Info needed
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: TRAVIS A.F.B.
Posts: 1,128
Car Info: 03 sedan 2nd wrx
Cam walked back after rebuild?? Info needed
Ok so on my 03 wrx I had the EJ20 rebuilt about 10k miles ago. Last week it just stopped working wouldn't start engine was seized stuck not hydrolocked but stuck. Took it to the shop that rebuilt it and they tore it apart heads are good no shavings in oil and oil is good nd clean. He said the CAMSHAFT walked back. I asked if that's covered under the warranty he said he didn't know machine shop is picking up and looking at block. Does anybody know if this is something that should be warranty after a $4800 dollar rebuild? And why would it walk back? Any advise will help. TIA
Oh yeah car has 129k on it now
Oh yeah car has 129k on it now
Last edited by DWNSHFT; 01-25-2013 at 09:05 PM.
#2
Registered User
iTrader: (4)
Join Date: Aug 2008
Location: Livermore
Posts: 2,127
Car Info: LUMPY CGM 05 WRX
My advice would be to talk to the shop who built it. Do not post on the forum who they are unless absolutely necessary.
You already know what happened so what other info do you need?
What causes this? I dunno.
You already know what happened so what other info do you need?
What causes this? I dunno.
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: TRAVIS A.F.B.
Posts: 1,128
Car Info: 03 sedan 2nd wrx
Yeah I'm think the shop did a good job I just want to know if this would b something covered under the rebuild warranty or am I gonna have to pay? I only ask so I get a 3rd party opinion of someone with not ties to either side
Thread
Thread Starter
Forum
Replies
Last Post
salvator_rizzo
Engine/Power - non turbo (All non turbo Imprezas)
6
08-06-2009 10:03 AM