Engine/Power - EJ20T (pre-2006 WRX and JDM) There is replacement for displacement, it is forced induction - OEM 2.0 liter turbo engines in the USDM WRX. 90-94 Legacy Turbo EJ22 turbo engines can also be discussed here.

Borla Hush Dyno Results

Thread Tools
 
Search this Thread
 
Old Dec 15, 2003 | 04:14 PM
  #1  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Thumbs up Borla Hush Dyno Results

I just got back from dyno-ing my car at ATP. I did a base line run on Dec 10th and I did the last run today with the Borla Hush 3" Cat-back system installed. I cann't post the actually piocs of the dyno results until tommorrow, seeing as how I'm not at work and don't have acces to a scanner right now. But my car in stock form put down 173.4 HP @ ~5.6K and 185.7 ft-lbs @ ~3.7K With the borla hush installed I had 183.1 HP @ ~5.1K and 186.5 ft-lbs @ ~4.3K.

The peak numbers are pretty decieving I think. After about 4.3K the Borla Hush really seprates itself from the stock system. BUt below 4.3K the stock system is putting down better numbers, I already expected that. So I'll put up the dyno grpahs tommorrow so you guys can actually see for yourselves. Oh yeah wanna thank Mike @ATP and Mike @ MPJ for their help.

Jason
Old Dec 15, 2003 | 04:50 PM
  #2  
soundwave's Avatar
more than meets the eye
iTrader: (14)
 
Joined: Nov 2003
Posts: 6,054
From: Bay Area
Car Info: ?
good results. hurry and get an UP/DP combo

Preston
Old Dec 15, 2003 | 05:22 PM
  #3  
En3D's Avatar
Registered User
iTrader: (12)
 
Joined: Nov 2002
Posts: 1,791
From: Bay Area, CA
what is the noise difference between the two.
Old Dec 15, 2003 | 05:54 PM
  #4  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Originally posted by En3D
what is the noise difference between the two.
At idle they are both same, actually I think I'm idling a little lower. I idle @ 500 when before it used to idle at 750 RPm. When I start the car there is a nice deep growl. At speed I hardly hear it. It is louder than stock but not annoyingly so. At WOT it sounds nice.

And yes I plan on getting a dp/up combo, those sound really nice!! BUt I gotta take care of some home maintenance first Preston.

Jason
Old Dec 15, 2003 | 08:40 PM
  #5  
Salty's Avatar
VIP Member
iTrader: (14)
 
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
just as promised. thanks for posting the results. did you have a difficult time switching them out quickly?

those two bolts are a ibt too short and are a pita IMHO
Old Dec 15, 2003 | 11:44 PM
  #6  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Originally posted by Sisqocqk
just as promised. thanks for posting the results. did you have a difficult time switching them out quickly?

those two bolts are a ibt too short and are a pita IMHO
Yeah those two bolts were hard. I could quite get my torque wrence to work in that area so I just guest-timated when I was tightening them down. Other than that install went pretty smooth except when the jack I was using to hold the exhaust fell on my hand.

Jason
Old Dec 16, 2003 | 04:16 PM
  #7  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Borla Hush Dyno now with pics

Stock baseline, Run 1 pinged on me; I think because I had a CAI
Attached Thumbnails Borla Hush Dyno Results-dyno1.jpg  
Old Dec 16, 2003 | 04:21 PM
  #8  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
With Borla Hush Installed
Attached Thumbnails Borla Hush Dyno Results-dyno2.jpg  
Old Dec 16, 2003 | 04:28 PM
  #9  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Dynorun.002 is stock and Dynorun.003 is with the Borla. Now you can compare.
Old Dec 16, 2003 | 04:29 PM
  #10  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Dynorun.002 is stock and Dynorun.003 is with the Borla. Now you can compare, Forgot to add thepic on the psot above
Attached Thumbnails Borla Hush Dyno Results-dyno3.jpg  
Old Dec 16, 2003 | 04:44 PM
  #11  
Salty's Avatar
VIP Member
iTrader: (14)
 
Joined: May 2003
Posts: 8,675
From: Wherever Sucks the Most
Car Info: 2003 WRX, 2008 Camry
sweet.

im glad i bought it now. silent and deadly
Old Dec 16, 2003 | 04:48 PM
  #12  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Originally posted by Sisqocqk
sweet.

im glad i bought it now. silent and deadly
Me too :banana: I didn't think there would be such a difference above ~4.5K over stock.
Old Dec 16, 2003 | 07:13 PM
  #13  
itwrx's Avatar
Registered User
iTrader: (1)
 
Joined: Oct 2003
Posts: 437
From: Fremont
Car Info: 03 WRX Blue
So is the borla the only mod for the time being?
Old Dec 17, 2003 | 09:20 AM
  #14  
xom's Avatar
xom
Registered User
 
Joined: Jan 2003
Posts: 212
From: Santa Cruz
Car Info: 04 GTO 5.7
Unhappy

if only borla made it mate up with aftermarket downpipes. Hate to buy something and then start chopping it up. stupid donut gasket
Old Dec 17, 2003 | 09:45 AM
  #15  
Wrxneffect's Avatar
Thread Starter
Registered User
iTrader: (7)
 
Joined: Nov 2002
Posts: 820
From: San Jose-near milpitas
Car Info: 03 Wrx black sedan + 2013 BRZ
Originally posted by itwrx
So is the borla the only mod for the time being?

Yeah it's the only mod for the time being. I'm trying to pay off my car first, but if one of my plans falls thorugh I'm gonna get my new rims and tires come Feb/March, and then get new springs and struts. Starting with suspension first before I hit up the engine any further.

Jason



All times are GMT -7. The time now is 04:39 PM.