blow off valves install help!!!!

Reply Subscribe

Thread Tools

Search this Thread

Jun 17, 2003 | 11:28 AM

mrmangos99

Guest

Posts: n/a

blow off valves install help!!!!

any one know how to install one or where to begin b/c i jsut bought one and need help badly! help me!

Jun 17, 2003 | 12:13 PM

iLoqin

Registered User

iTrader: (5)

Joined: Apr 2003

Posts: 6,826

From: No Way

Car Info: Nadda

Uhh.. put together the whole BOV and the kit.. then just bolt it on?

Jun 17, 2003 | 12:16 PM

VF22WRX

Registered User

Joined: Dec 2002

Posts: 65

From: Denver

Car Info: '02 WRX Sedan

First, you will need to unbolt the stock bov from the intercooler. Remove the vacuum hose off the stock bov and remove the stock bov from the return hose. You will then need to plug the bov return hose will the supplied plug (this is easier to do if you remove the intercooler). Bolt the new bov onto the intercooler and connect the vacuum hose to it. Thats all there is to it. Hope this helps. Good luck!

Jun 17, 2003 | 12:17 PM

Ditty77

Registered User

iTrader: (1)

Joined: Feb 2003

Posts: 672

From: Sold my condo now I'm homeless

Car Info: 2002 WRX

and aren't there instructions anyways?

Jun 17, 2003 | 03:57 PM

mrmangos99

Guest

Posts: n/a

no instructions with it. which hose do i use for the vaccum? and the reason i had lots of trouble was b/c the bracket holes were off from what they needed to be to bolt onto the bov. do i use the stock hose for the vaccum or what? thanks

Jun 17, 2003 | 04:46 PM

VF22WRX

Registered User

Joined: Dec 2002

Posts: 65

From: Denver

Car Info: '02 WRX Sedan

What bov are you installing?

Jun 17, 2003 | 08:55 PM

dan avoN7

2006 Mt Hammy Car Show Winner

iTrader: (11)

Joined: Dec 2002

Posts: 2,730

From: Danville, CA

Car Info: Black 03 WRX, White 04 E46 M3

yea you need to be more discriptive as to whether or not it's 100% atmo or recirc. Also if you just have a bov and not the flange kit you won't be able to install it, i am assuming you have the stock tmic. If thats the case and you do have the kit. Just attach the bov to the flange and unbolt the stock one. Then there should be some type of piece to put in the stock recirc hose to cap it off. Then bolt on the bov to the place where the stock one was (duh) and then attach the vaccum hose that was on the stock bov. It's really simple, i dont see where your going wrong.