$200 budget
Registered User
iTrader: (7)
Joined: Dec 2002
Posts: 2,859
From: Flying on the H1 w/ 75 psi of compression on all 4 cyl
Car Info: PnP VF30 w/ STi injectors Perrin intake walbro fuel pump w/ a TXS TBE
yes it is a tight budget. but if u need directions on how to do an uppipe installation just go to www.scoobymods.com
and yes i would agree that an uppipe is definately the best bang for the buck since u only have $200.00 bucks
and yes i would agree that an uppipe is definately the best bang for the buck since u only have $200.00 bucks
Guest
Posts: n/a
Maybe:
$4.00 MBC
http://www.c-speedracing.com/howto/mbc/mbc.php
$43.00 K&N filter
http://www.optauto.com/webstore/prod...k=yes&dept=350
$152.00 Perrin I/C hose kit
http://www.optauto.com/webstore/prod...=yes&dept=1041
------------------------------------
$199.00
$4.00 MBC
http://www.c-speedracing.com/howto/mbc/mbc.php
$43.00 K&N filter
http://www.optauto.com/webstore/prod...k=yes&dept=350
$152.00 Perrin I/C hose kit
http://www.optauto.com/webstore/prod...=yes&dept=1041
------------------------------------
$199.00
2006 Mt Hammy Car Show Winner
iTrader: (11)
Joined: Dec 2002
Posts: 2,730
From: Danville, CA
Car Info: Black 03 WRX, White 04 E46 M3
well i wouldn't get a MBC unless you have the boost gauge. If i were you i would say uppipe also, its good to get rid of that cat. But since you seem new to the boards that might be hard to install since it's your first mod and it is one of the harder ones to do. If you don't do uppipe than i would say get some IC hoses, mpjperformance has great deals on the samco kit for $120.
Guest
Posts: n/a
You can get a MBC for $60, Gut your stock uppipe for free, get a gauge pod and VDO boost gauge for $60 at summit racing, Perrin crank pulley $94. That puts you alittle over but not by much. Next round DP $?? depends on brand, Vishnu EMI $250, and IC pipes $150 and you will have a fast WRX. Mine 0-60 4.5 sec and 13.5 1/4 mile on 94 octane. Good bang for the buck.
Thread
Thread Starter
Forum
Replies
Last Post