running stock ECU on my setup....
Thread Starter
Former Sponsor
iTrader: (18)
Joined: Nov 2002
Posts: 4,331
From: BAIC Wagon/Sedan Clique
Car Info: a few WRX's and a Z ;)
running stock ECU on my setup....
i'm thinking about running stock ecu on my setup:
upgraded turbo
upgraded injectors
Fully catless exhaust system
short ram intake
crank pulley
I'm planning on running stock boost.
what issues can i expect having?
SD
upgraded turbo
upgraded injectors
Fully catless exhaust system
short ram intake
crank pulley
I'm planning on running stock boost.
what issues can i expect having?
SD
Registered User
iTrader: (2)
Joined: Nov 2002
Posts: 955
From: Mann Engineering, Santa Clara, CA
Car Info: 13BRZ, 11FXT, 08T25, 07STI, 02WRX
Probably Cat Ineffiency would be one code that you would throw. Maybe misfiring from the pulley. Other than that, the ECU would be able to compensate for almost everything.
Guest
Posts: n/a
Incredibly rich and it will run but it will have a very hard time running. Also do not run it very long like this as you will destroy yours cats if you have any, and ruin the O2 sensors.
I would suggest pulling the WRXLink out the day you head up Vishnu. As you will not have issue's on the dyno then, like on non-working ECU etc...
Though you might want to test this before you head up just to make sure it is working.
Just my $0.02
Bill
I would suggest pulling the WRXLink out the day you head up Vishnu. As you will not have issue's on the dyno then, like on non-working ECU etc...
Though you might want to test this before you head up just to make sure it is working.
Just my $0.02
Bill
Thread
Thread Starter
Forum
Replies
Last Post
SkizzDawg
Suspension, Handling, and Brakes
18
May 6, 2012 07:42 PM
ProjekBluBuk
Suspension, Handling, and Brakes
8
May 24, 2009 09:00 PM
FostersAFB
Used Aftermarket Car Parts For Sale
2
Sep 8, 2004 04:04 PM
wonton2049
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
May 4, 2003 06:29 AM
