EQ Tuning - Engine Build Packages!
Registered User
iTrader: (23)
Joined: Apr 2009
Posts: 5,436
From: Bay Area 925
Car Info: 2018 Tacoma TRD PRO
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Registered User
iTrader: (21)
Joined: May 2008
Posts: 1,038
From: CoCo....or tahoe!
Car Info: 07 specB
Got two more STI's coming in tomorrow. One with a blown head gasket and another with a Full Race twin scroll setup that we need to modify, fix leaks, and tune!
-- Ed
-- Ed
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Yeah I'm curious too - though you don't really need a very clean room at all for engine assembly (I worked in semiconductor manufacturing, talk about needing cleanroom *****)
1 mil is 25 microns, and that's on the order of engine block tolerances. Even precision machining goes down to half a mil, 12.5 microns. Class xx/xxx/xxxx/xxxxx cleanroom specs usually deal with <10 micron particles
I doubt the environmental conditions need any modifications - yeah you care about the effects of humidity/pressure/temperature but if you work out the math for all with the dissimilar materials involved, from an engineering perspective the difference is below tolerance thresholds
