Whats broken?
Thread Starter
VIP Member
iTrader: (17)
Joined: May 2005
Posts: 22,776
From: Sunnyvale, CA
Car Info: '13 BRZ Limited / '02 WRX
Whats broken?
Ok, something is up with my front wheel area...I cannot get one of the lug nuts off! It'll turn a little bit but doesn't loosen up at all, it also gave me problems when trying to tighten it last time I changed my wheels, so I'm wondering if the bolt is stipped or damaged or something. Anyways, whats the technical name for the bolt and assebly, the hub? Also, is it possible to change out one of the bolts instead of the entire hub?
Thread Starter
VIP Member
iTrader: (17)
Joined: May 2005
Posts: 22,776
From: Sunnyvale, CA
Car Info: '13 BRZ Limited / '02 WRX
ok, my factory service manual says that the hub and hub bolts are separate parts, but it doesn't give me part numbers. Does anyone know the actual part number? That'd make it a hell of a lot easier when going into the stealership service dept. to order a new one
Registered User
iTrader: (14)
Joined: Nov 2001
Posts: 14,221
From: Peoples Republik of Kalifornia
Car Info: 05 H2 SUT, 45 GPW, 10 Murano, 13 Boss 302
The only thing that looks remotely like it is: 28055AA003 Hub Bolt
If you ever need part numbers, I suggest going to www.subaruparts.com and using the Part Lookup function for Impreza. Once you drill down to the proper category, they provide pictures. Then you just click the individual part link and the part (and part number) will show up in your cart.
If you ever need part numbers, I suggest going to www.subaruparts.com and using the Part Lookup function for Impreza. Once you drill down to the proper category, they provide pictures. Then you just click the individual part link and the part (and part number) will show up in your cart.
Registered User
iTrader: (2)
Joined: Aug 2004
Posts: 151
From: san jo-
Car Info: '05 crystalgrey sti
Yes. The hub bolt is what you need. I replaced a couple of them last week. I'm not sure what you drive, but ask for hub bolts for your specific car. you will need to remove your calipers, so if you've never done that I would suggest taking it to a shop. If you do it yourself, the guy who helped me out used airtools, so I would recommend you use them too. Good luck.
Thread Starter
VIP Member
iTrader: (17)
Joined: May 2005
Posts: 22,776
From: Sunnyvale, CA
Car Info: '13 BRZ Limited / '02 WRX
Thread
Thread Starter
Forum
Replies
Last Post
Imprezer
Suby Shopping & Maintenance/Warranty
10
Jun 28, 2004 01:24 PM
spankaveli
Engine/Power - EJ20T (pre-2006 WRX and JDM)
12
Feb 24, 2004 06:04 PM
huck
Dumpster
5
Dec 1, 2003 09:29 PM




