what would be all that i need in order to swap out my 5 spd to a 04 STi 6 spd???? please ! TIA

 

trany, axels, F&R diffs, new clutch flywheel, dccd. will cost a lot of $$

 

whats the axels, i cant use the same ones 5x100 wrx !?

 

tranny alone is 2800-4000

 

I know I have a swap, so I know the price and you also might want to bet the sti brembos when your at it!

 

You can get full swaps for 4-4,500.

 

^damn thats bank

 

You could go the cheap route too, you have the 3.54 ratio in your R160, Buy an 06 or 07 6MT (the ratio will match your stock R160), and the front axles will mate to it, get an auto drive shaft. You'll be able to run your stock hubs/knuckles/brakes. It won't be as strong this way and unless you get an DCCD controller, the 65% power to the rear might cause the R160 to fail prematurely. You could buy the other stuff as you get money. Just another option.

Do a search on Nasioc, there is a bunch of info on every option you have for this swap.

 

Built five 5-speed

I'm probably picking up some MFactroy gears in 4-5 months.

 

I don't know if this it true but I read of a different forum that M factor went under... I could be wron but thats what I read

 

The site is still up. Huh