Stock pulley size and special tool
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: san jose
Posts: 130
Car Info: 06 sgm obs
Stock pulley size and special tool
Does the 2006 2.5i and 2002-2006 WRX have the same crankshaft pulley?
I'm interested in making a custom tool (similar to the dealer's special tool) to hold the pulley while loosening the crankshaft bolt and need to measure the size and location of the four ~10mm holes on the pulley.
I don't like doing it the ghetto way - putting a breaker bar + socket on the bolt and cranking the starter motor.
I'm interested in making a custom tool (similar to the dealer's special tool) to hold the pulley while loosening the crankshaft bolt and need to measure the size and location of the four ~10mm holes on the pulley.
I don't like doing it the ghetto way - putting a breaker bar + socket on the bolt and cranking the starter motor.
Thread
Thread Starter
Forum
Replies
Last Post
Donnie_Doritos
NorCal Classifieds
3
03-30-2008 10:57 AM