s-03 tire blowout
Thread Starter
2006 Mt Hammy Car Show Winner
iTrader: (11)
Joined: Dec 2002
Posts: 2,730
From: Danville, CA
Car Info: Black 03 WRX, White 04 E46 M3
s-03 tire blowout
ugh what a way to end the night, just leaving a friends house around 2am and murging onto the freeway when my front right tire blew out. About two weeks ago on the way to gruppe-s it was really really low on air so i filled it up and it's been fine since. been checking the pressure every day to make sure it's holding and the pressure always was the same but the car still pulled to the right a tiny bit. guess something was wrong with the tire as it finally decided to blow. anyone know about warranty on tires if the company deals with it or the shop i ordered them through does? Probably just replace this one tire since they are fairly new (5k miles) and have a good amount of tread left.
Friendly Neighborhood Ogre
iTrader: (6)
Joined: Mar 2000
Posts: 19,930
From: www.gunatics.com
Car Info: GUNATICS.COM
If you get your tires from Americas Tire Co, get the Road Hazard package. You pay $15 per tire, and if you blow one out, they replace it, no questions asked.
Registered User
iTrader: (4)
Joined: Mar 2003
Posts: 3,670
From: East Bay / Pomona
Car Info: '02 PSM WRX
Sounds like it was a possible incorrect mounting. Especially for S-03s with very stiff sidewalls, they can be a biznatch to mount onto a wheel. With that happening, it's possible to rip the bead, which is the part that holds the tire to the wheel. That can cause a small airleak, and even seal that problem with enough PSI in the tire. That could be why your tire was low, but when you aired it up, it was fine.
How did the tire blow? If it's the tread separating from the sidewall, then take it to whichever shop that mounted it, ask them to dismount it, and check the bead for any type of tear since that kind of blowout shouldn't damage any more of the bead than what was put on mounting or dismounting.
just my .02
-Jeff
How did the tire blow? If it's the tread separating from the sidewall, then take it to whichever shop that mounted it, ask them to dismount it, and check the bead for any type of tear since that kind of blowout shouldn't damage any more of the bead than what was put on mounting or dismounting.
just my .02
-Jeff
Thread Starter
2006 Mt Hammy Car Show Winner
iTrader: (11)
Joined: Dec 2002
Posts: 2,730
From: Danville, CA
Car Info: Black 03 WRX, White 04 E46 M3
Originally Posted by killaho
that the same tire thats on your bent up rim?
I'm not sure about poor mounting of the tire. I ordered them from Christian's shop and he had his friend mount them for me. Guess i'll give him a call and see.
Thread Starter
2006 Mt Hammy Car Show Winner
iTrader: (11)
Joined: Dec 2002
Posts: 2,730
From: Danville, CA
Car Info: Black 03 WRX, White 04 E46 M3
hah acually it was just a nail. i didnt even look at the tire last night since i didnt get back to my car till 4am to put a stock rim/tire in the rear and move that tire up front to fit over my brakes. Tiny nail dead in the center of the tire. Can tire shops fix this by removing the nail and patching it or is this something where i need a whole new tire?
VIP Member
iTrader: (3)
Joined: Nov 2002
Posts: 3,041
From: http://freshlove.grandmighty.com
Car Info: looking for a gc
well if the tire blew, then it should be unrepairable, if it was just flat, you should be able to patch the hole......
another person thinking s03 sale.. hahah
another person thinking s03 sale.. hahah


