Paradox

iTrader: (7)

Hey BAIC, I need to find a pair of 18mm LONG tapered spark plug non-foulers. I've searched all the auto shops in my neighborhood and none have them. I was also told that they don't exist anymore, is that true? Also, maybe does anyone on here have some?

I need them for my O2 sensors in hopes to make a CEL go away. That may not be the best way but that's the only way I've heard of. Feel free to school me.

Any input would be very helpful. TIA y'all!

xhengmanx

iTrader: (57)

speed element sells a o2 mechanical cel fix. does the same thing as the antifouler cept it cost 15 dollars. i might have an extra one laying around somewhere also but not to sure where its at.

kyoung05

iTrader: (2)

You wouldn't happen to mean this little thing, would you?




I just so happen to have it laying right here, with no need for it.
________
Vaporizers

Paradox

iTrader: (7)

Anthony, I'll look into it. Thanks.

kyoung05 - Yeah that's the thing I need, but I need it to be longer. I see yours is the short one and one is screwed into the other. I tried that one today but had to return it because it wouldn't reach my O2 but would go into my header bong. Thanks though!!

kyoung05

iTrader: (2)

Paradox, you actually have to drill one of them through otherwise the O2 won't fit. Mine has been drilled, and worked fine - my O2 sensor fit through and was still able to bolt onto my downpipe. In any case, you're more that welcome to it if you want it.
________
Ifa forum

xhengmanx

iTrader: (57)

yea i had AHQ do it for me when i needed hte nonfouler. you have to drill the inside diameter to make it fit like what kyoung05 said.

Yin

iTrader: (40)

where do you go to get it drilled out? does a place like home depot do it?

kyoung05

iTrader: (2)

I had a muffler shop do it while they were fabricating my catback. They just used a drill press with a metal bit. I think any place that has a standard drill press should be able to do it.
________
Dating Advice Forum