I would like to modify a sedan rear seat bench to fold, in order to place it in my wagon. I've searched everywhere (nasioc, scoobymods ect..) and cannot find much info on it. its possible that my searching skills are ****; but if anyone has any info, please post up.

Also, can you use recaro sliders with the raising mechanism to raise a stock oem seat that doesnt have a raising mechanism??

 

If you find out how, I'd like to know as well.

 

You can't easily. What I have on my car is I ripped out the sound deadening and took out the 2 metal bars that support the seats, and I don't have my rear seats bolted in. So when I need to carry a huge thing (like a friggin door frame or a 12 foot long 2x4), I just lift up the rear seat. In this fashion i've got a longer "bed" than most half ton pickups

The rear seat is two pieces and I think you can't remove the top half w/o taking out the bottom half first, so maybe what you COULD do is make a hinge where the top half bolts into the chassis.

 

Trade in car for a wagon and your done! wagons FTW

 

mmmmhmmm....but, i have seen a gutted wrx, and i see all these things on teh opening to the trunk, i would believe there is no easy way around it

 

you can't fold the rear backrest down because the seat cushions lay on top of where it's bolted to the car

 

not going to happen

 

i have a wagon, but i want to put in seats from a sedan. And I'll do anything to make it happen. Anything

 

well that completely changes everything....somehow

 

how do rear seats in wagon differ from sedan? besides wagons can fold down...im confused

 

? so you want non folding seats from a sedan in your wagon or do you want sedan seats to fold in your wagon?

 

I have an 04 2.5TS wagon with nasty grey cloth seats. I would like to get the newer black interior in my wagon (possibly leather), its very hard to find one for a wagon; but a little easier for a sedan, especially with all the wrx owners upgrading to the sti interior. the only problem is that I dont want to give up the folding mechanism on the wagon. So I would need to modify the rear bench to make it fold.

so yes, I want sedan seats to fold in my wagon. its absurd, but true.

I could buy the leather cover kits ect.. but this could easily cost over a grand installed. I have the front seats installed already, I just need a solution for the rear bench. sorry for the confusion.

and if anyone has any info on seat sliders to raise/lower my oem front seats I would appreciate your sharing it.

 

Back from the dead



I want my rear seats to ****ing fold down. Has anyone done this yet?

 

couldnt you just go have the seats made somewhere to fit and work? I mean if you cant find a way to do it with stock sedan seats you might just have to pay to have it done. The way i look at it, if i wanted it bad enough i would pay to have seats made for me.

 

I want to install a trunk in my wagon to replace the hatch. I will do anything to make it happen