Mann Engineering - Spring Testing Vehicles Needed
Thread Starter
aka FlukeWRX
iTrader: (6)
Joined: Feb 2006
Posts: 3,657
From: East Bay
Car Info: '03 WRX WRB Sedan
Mann Engineering - Spring Testing Vehicles Needed
Test Vehicles Needed for Springs Testing - Mann Engineering - NASIOC
"Mann Engineering is looking for the following test vehicles for development of spring testing!
1. 2012-2014 Impreza (non WRX/STI), Sedan or Wagon does not matter, as we want to test the loading capacity to see how much weight we can put in before the rear start to sag. Needs to be stock. These are NOT lowering springs but heavy duty springs.
2. 2010-2014 Outback 3.6R, Needs to be stock.
Customer will receive the final set of springs installed and aligned at no charge. Please contact us at contact@mann-engineering.com if interested. Thank you!
https://www.mann-engineering.com/index.php/ "
(FYI - I'm not personally involved with Mann Engineering, but they are a local vendor and I didn't see this posted here on i-Club so just passing this information along to anyone that may be interested in helping them out {Looks like you could end up with a free set of springs and a new alignment as well})
"Mann Engineering is looking for the following test vehicles for development of spring testing!
1. 2012-2014 Impreza (non WRX/STI), Sedan or Wagon does not matter, as we want to test the loading capacity to see how much weight we can put in before the rear start to sag. Needs to be stock. These are NOT lowering springs but heavy duty springs.
2. 2010-2014 Outback 3.6R, Needs to be stock.
Customer will receive the final set of springs installed and aligned at no charge. Please contact us at contact@mann-engineering.com if interested. Thank you!
https://www.mann-engineering.com/index.php/ "
(FYI - I'm not personally involved with Mann Engineering, but they are a local vendor and I didn't see this posted here on i-Club so just passing this information along to anyone that may be interested in helping them out {Looks like you could end up with a free set of springs and a new alignment as well})
Registered User
iTrader: (6)
Joined: Mar 2006
Posts: 9,581
From: on the way to lake tahoe to shread! turbo beast
Car Info: 2016 WRX, 2014 lifter forester XT, 2005 JDM207 WGN
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
VIP Member
iTrader: (9)
Joined: Nov 2002
Posts: 4,665
From: No So Co
Car Info: '00 BRP RS Sedan / '04 PSM FXT (RIP)
Well if they're anything like the Swift springs I got from Mann for my '04 FXT then they'll be amazing. The new Foz certainly needs a couple inches of drop. Glad to see they're doing something for the Outback. It definitely needs to lose a bit of height.
-Brian
-Brian
Registered User
iTrader: (9)
Joined: Jun 2011
Posts: 1,624
From: San Jose
Car Info: 2001 Acura TL - 2016.5 Mazda CX-5
IDK...to test run their springs everyone will have to sell their exhausts and dp's and replace them with Milltek. No one runs anything but Milltek at Mann.
VIP Member
iTrader: (9)
Joined: Nov 2002
Posts: 4,665
From: No So Co
Car Info: '00 BRP RS Sedan / '04 PSM FXT (RIP)
-Brian
Thread
Thread Starter
Forum
Replies
Last Post
ultrarevvin1
Vendor Group Buys/Specials
0
Apr 2, 2014 04:05 PM
JooseyJeff
Bay Area
57
Oct 21, 2011 07:37 PM