HitMan912

iTrader: (1)

I searched, and I have a history of sucking at searching so forgive me but...

My upper radiator hose rubbed a pulley so it now has a hole in it. I even had the soda can armor for the fan but somehow never noticed the pulley. Will a stock OEM upper radiator hose fit on a Koyo radiator? I've heard they are just too long and need to be cut 1/4 inch at most but I can't find any real proof. It's for a 2002 WRX.

Concillian

iTrader: (2)

All the radiator hoses are the same, need to cut about 1/4 off each end.

I have a Koyo rad and Mishimoto hoses, lol. Doesn't matter what hoses, they all need trimmed or they'll rub.

HitMan912

iTrader: (1)

Thank you, kind sir.

slugrx

iTrader: (12)

same happened to me, the vendor i went to trimmed it wrong and a hole was torn by the radiator fan, not to mention they didnt bleed the system properly, a loose drain plug and a loose hose..big snafu but thats a different story..

got a random hose and trimmed it properly and its been fine since

camshaft06

iTrader: (3)

Hey Dave, if you need an upper hose, I have one sitting right here you can have.

gunmtl

iTrader: (5)

That same thing happened to me, yup gotta trim it up!
Also have the Koyo Rad

strider327

iTrader: (10)

Trim about a quarter inch you'll fine on the top.

RLLYRCR

iTrader: (6)

i just installed a mishi rad and didn't have to cut and there is no way my hoses are going to rub.