Kartboy hardware?
Thread Starter
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
Kartboy hardware?
Anyone have Kartboy rear end links that they could let me know what the rear hardware is?
I got some end links and no hardware. The hardware is just standard OSH stuff so I'm not paying $15 plus shipping for it.
I got some end links and no hardware. The hardware is just standard OSH stuff so I'm not paying $15 plus shipping for it.
Your PM was full, so wasn't able to let you know those were ready to go...
Kartboy dot com :: Subaru WRX :: 2002-2007 WRX :: Kartboy Replacement Bolt Kit (pair)
This should be the hardware you need to put the rear links on.
These come with them stock when you purchase the rear endlinks new.
This should be the hardware you need to put the rear links on.
These come with them stock when you purchase the rear endlinks new.
Last edited by southsti; Sep 25, 2012 at 11:43 AM.
If in doubt, FLAT OUT
iTrader: (33)
Joined: Oct 2010
Posts: 7,046
From: Nor Cal SJ
Car Info: 2010 Hatch, 2011 Sedan
Registered User
iTrader: (11)
Joined: Jan 2008
Posts: 6,849
From: Cheesesteakville
Car Info: 05 wrx wagon, 90 celica alltrac, 66 mustang
Cant you just bring them into OSH and see what fits? Or do you mean the hardware that bolts to the car? If its the ones that bolt to the car just drive to OSH and pull one off to take inside and match up.
Thread Starter
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
I don't know how long the bolts need to be so it's not so much which size or pitch... it's the length.
And I might take the perrin's too. LOL! We'll see what I think of the kartboys fitment. I really want whitelines but these were available so I snagged them.
If I keep the car I'll switch to the whitelines eventually anyways. These are temporary to shut the squeak of the perrins up.
Thread Starter
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
Registered User
iTrader: (4)
Joined: Mar 2003
Posts: 3,670
From: East Bay / Pomona
Car Info: '02 PSM WRX
EDIT: Oops didn't see your reply before I posted this. For the length, it's just the length of the Kartboy + swaybar thickness + nut length with a little additional to get it seated securely. Let me see if I can go outside really quick to measure the length.
Last edited by STi-owns-evo; Sep 25, 2012 at 01:13 PM.
Thread Starter
General Pimpin'
iTrader: (7)
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
Yeah... apparently kartboy tells you to use the stock stuff. Lame.
My perrin hardware is probably fine. It's grade 8.
My perrin hardware is probably fine. It's grade 8.
Registered User
iTrader: (4)
Joined: Mar 2003
Posts: 3,670
From: East Bay / Pomona
Car Info: '02 PSM WRX
I just measured the length, the entire length of the bolt including the head is about 2.5 inches.
Waiting for the immature comments on length and head now... lolol
Lil' Slugger
iTrader: (7)
Joined: Dec 2006
Posts: 847
From: N. Lake Tahoe, NV
Car Info: 05 WRB STi Wagon/00 BRP GC Sedan