Hey im getting bigger injectors next week, and i have a perrin crank pully that i need installed. Does anyone want to help?? I need a breaker bar, and a torque wrench. I dont know how to install the injectors though

I will feed you

thanks,
Daniel

 

LIC motorsports knows how to install that you should have them do it

 

i thikn kevin darkonion knows ohw to do the crank pulley. it's not taht hard, when the install fest gets off the ground, should definitely go.

 

crank pulley is easy and you don't need a breaker bar. Put it in 5th gear and take it off.

 

Crank pulley isn't too bad. There is the video on HSPN. Just follow it step by step and make sure that you actually seat the pulley in correctly. Yeah.

 

ive never understood what the putting it in fifth did.. care to give a simple explanation?

 

We just followed the directions that Perrin sent with the pulley.

 

yo dan my friend just did an 18g on his car with the pump and injectors by himself. i'll ask him if he can help you out. what injectors are you getting?

 

I can help ya with the injectors for a little gas money =P

 

injectors are a pain, once you take off those green brackets, leave them off.

-Ave

 

well i already have the sti pinks but im getting the Deatschwerks 650cc ,and a forge bov. if anyone is looking for some sti pink injectors with about 4k on them im here, also a turbo xs bov, and a v1 accessport for an 04 wrx.

 

Although injectors aren't that hard to do (don't be afraid to bend the fuel rails) few thing to keep in mind are,

- The brackets are there to prevent fuel vapor explosion in a frontal (but you have an fmic, not like you care about surviving a frontal anyways)
- O-rings leak easily in installs, maybe people just forget to oil them
- leaks from the fuel injectors/rail are number 1 cause of car fires in modified cars I think

you sure you wanna trust someone who's not a mechanic to install them when you already have so much expensive gear on the car, and injectors are pretty cheap to install?

 

Injectors are not hard, but they take a lil time and patience. Pulley in fifth with a friend stepping on the brake while you use a breaker bar is all it needs.

 

Pm sent...!

 

took me and a friend around 2 hours to do my injectors.