Got in an accident. Any advice?

Old Feb 9, 2005 | 05:08 PM
  #2  
AWD 20T's Avatar
VIP Member
iTrader: (11)
 
Joined: Dec 2002
Posts: 3,641
From: Bay Area, CA
Car Info: 2009 G Ride
BCCC (Bay Cities Collision Center) in Burlingame is EXCELLENT. They did custom work on my Type R and fixed a family member's S2000 which I had an accident in. They can be pricey, so if you are going through insurance I would recommend them, but if you're coming out of pocket, I'd look elsewhere.
Old Feb 9, 2005 | 05:10 PM
  #3  
OneManArmy's Avatar
General Pimpin'
iTrader: (7)
 
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
hard to say how much it will run.

depends on what is bent that's not initially visible. LIke the floor of the trunk or frame.

Looks like you're gonna need a new tail light/bulbs. New rear bumper. New rear quarter panel. And a bunch of little stuff. And possibly some stuff you can't see.

Just take the hit and go through insurance for both cars. Sucks. But hey...you could always talk to the body shop and get them to add exhaust onto the bill...just kick it or something so it's bent.

my guess is gonna be around $7k. If nothing major is jacked up.
Old Feb 9, 2005 | 05:38 PM
  #6  
OneManArmy's Avatar
General Pimpin'
iTrader: (7)
 
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
Originally Posted by STi'm Crazy
i would think between 2.5-4k to get it fixed if its any more then 2500 i would make a claim but thats just me. GOOD LUCK!!!

Dude..just to paint my car...entire left side and roof. $3000. Only parts to replace where one window and onen roof rail. So you figure $2500 in paint.

His paint is gonna be pretty close to that. Quarter panel, bumper probably the trunk will need to be blended. Parts are gonna be expensive too. Rear quarter panel and bumper alone are gonna run quite a bit. $175 for the tail light plus bulbs. (some places will charge $290), Bumper reinforcement gonna run you about $150 and the bumper cover is about the same. Quarter panel is gonna run $360-460.

So that's $725 on the low side and $1000 on the high side just for parts. And that's not including things like trim, fender lining, clips, hingest, etc.

So you figure....$1000 for parts. $2500 for paint plus laber and misc stuff.

Gonna run $6k plus. If anything is bent and need replacing or straitening....could easily double. I'm thinking $6-9k is a safe bet.
Old Feb 9, 2005 | 06:04 PM
  #8  
OneManArmy's Avatar
General Pimpin'
iTrader: (7)
 
Joined: May 2003
Posts: 23,019
From: Knee deep in beer. subabrew crew, ca.
Car Info: MY04 aspen wrx wagon.
I went through Creative Kustoms.

Great job. It's not easy to match whites and my car is flawless.
Old Feb 9, 2005 | 06:05 PM
  #9  
Ex-ricer's Avatar
Registered User
iTrader: (2)
 
Joined: Aug 2003
Posts: 2,294
From: The confines of my own mind.
Car Info: 180sx super drift machine!
Maaco. Earl Scheib is teh win, too.
Old Feb 9, 2005 | 08:26 PM
  #12  
Project Worx's Avatar
Registered User
 
Joined: Mar 2003
Posts: 413
From: San Jose
Car Info: 350hp WRX/2008 EVO X
Guessing around 4k
Old Feb 9, 2005 | 08:56 PM
  #13  
crashnscar's Avatar
Registered User
iTrader: (7)
 
Joined: Dec 2004
Posts: 802
From: San Luis Obispo (school), Los Altos (home)
Car Info: 03 Cummins, 99 miata, 91 v8 miata, 90 spec miata
I'm guessing around 5k$

Needs parts, paint, and you might have bent metal. They will probably need to blend everything, and if they do a great job, it can take some time.
Old Feb 10, 2005 | 05:56 PM
  #15  
crashnscar's Avatar
Registered User
iTrader: (7)
 
Joined: Dec 2004
Posts: 802
From: San Luis Obispo (school), Los Altos (home)
Car Info: 03 Cummins, 99 miata, 91 v8 miata, 90 spec miata
Really? 2k - 3.5k aint that bad. Was anything bent?

Thread Tools
Search this Thread

All times are GMT -7. The time now is 08:58 PM.