SubaruStu

I was wondering if anyone can help me??? I have istalled my invidia downpipe but it is leaking where it connects to the mide pipe has anyone got any ideas of what i can do to fix this, sealer? i used the gasket that came with the pipe and it is F-------G leaking, should i use an OEM gasket? i know that the old piece that joined on had a circular piece on the flange, maybe this is the problem. can anyone help?

dan avoN7

iTrader: (11)

dont use that donut gasket when you mate the stock catback to the aftermarket dp. It will most likely leak a little bit because of the different style flanges.

SubaruStu

i didn't use the donnut gasket. I just put some high temp gasket sealer and it seems to have done the trick! for now that is

SubaruStu

I just put in my HKS uppipe and didn't get a CEL? Nearly everywhere i looked i was told i would get one? was i lucky?

dan avoN7

iTrader: (11)

the cel won't light up right away. Just go out and get a resistor from radio shack now so you wont have to reset your ecu when the cel does appear.

Azjon

I had my HKS uppipe on for like a year and that CEL dookie finally popped up. I fixed it a few days ago. If you need a resistor just for later let me know quick before I throw them away.