Eibach Experts, need your help
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Bay Area (NorCal)
Posts: 350
Car Info: 2011 STi
Eibach Experts, need your help
How would you know/check the spring rate of an eibach/ground control springs?
I thought the last 4 digits states that, but when i recived a new set, this is what's written on the springs.
GC200.64.77
???? so i don't think the spring rate would be 77lbs...
and i did try to do a search online about it (no luck, or just didn't know where to look)
TIA
I thought the last 4 digits states that, but when i recived a new set, this is what's written on the springs.
GC200.64.77
???? so i don't think the spring rate would be 77lbs...
and i did try to do a search online about it (no luck, or just didn't know where to look)
TIA
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Bay Area (NorCal)
Posts: 350
Car Info: 2011 STi
I did try and they do not have a list of their springs.
I was trying to call them and they are closed during weekend (i think theyll open on tuesday due to pres day weekend).
Thanks anyway...
I was trying to call them and they are closed during weekend (i think theyll open on tuesday due to pres day weekend).
Thanks anyway...
#5
Registered User
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Bay Area (NorCal)
Posts: 350
Car Info: 2011 STi
Originally Posted by STi-owns-evo
It's Length/ID/Spring rate. Usually measured in inch/inch/lb-ft or mm/mm/kg-mm. Yours could be 200mm (7.87in) 64mm (2.5in) and 7.7kg/mm
hhmm... thanks a lot!!!
Thread
Thread Starter
Forum
Replies
Last Post
DougZ
Subaru General
5
09-13-2007 10:47 AM
NW OBS
Engine/Power - non turbo (All non turbo Imprezas)
0
10-16-2006 09:46 PM