Cobb Ap Help! Car Won't Start!!!
BAM9 Ladies choice Carshow winner
iTrader: (5)
Joined: Jan 2006
Posts: 3,810
From: Vallejo-Fairfield-Travis
Car Info: 13 FR-S/05 STI
you can also talk to ED from EQ Tuning on AIM. He knows that AP inside out. AP Guru that is! Good Luck, hopefully, we can get it figured out
Thread Starter
Registered User
iTrader: (8)
Joined: Apr 2008
Posts: 1,493
From: Hercules CA
Car Info: 03 WRX --> 07 STI --> 10 Cayman S
damn this is very discouraging...
Thread Starter
Registered User
iTrader: (8)
Joined: Apr 2008
Posts: 1,493
From: Hercules CA
Car Info: 03 WRX --> 07 STI --> 10 Cayman S
Thread Starter
Registered User
iTrader: (8)
Joined: Apr 2008
Posts: 1,493
From: Hercules CA
Car Info: 03 WRX --> 07 STI --> 10 Cayman S
Former Sponsor
iTrader: (14)
Joined: Sep 2006
Posts: 3,246
From: Hayward, CA
Car Info: WRX, EVO, MSP3
It does sound like you may have to send the AP and ECU into Cobb, if this is the case and your stuck ECU less and in need of getting around give me a shout I have a spare ECU at the shop that will get you around while you wait.
Mike
Mike
Registered User
iTrader: (11)
Joined: Apr 2005
Posts: 3,863
From: Land Of The Dead
Car Info: Cage and Slicks and Wing OH MY!!
to uninstall the ecu, pull back your carpet, unplug the ecu, remove like 6 10mm bolts and it comes irght now.
its HELLA easy.
even if you cant change your own oil you can do this!!
its HELLA easy.
even if you cant change your own oil you can do this!!
Thread Starter
Registered User
iTrader: (8)
Joined: Apr 2008
Posts: 1,493
From: Hercules CA
Car Info: 03 WRX --> 07 STI --> 10 Cayman S
Ok...
So I talked to Cobb and they didn't mention anything about sending my ECU to them.
What they think is wrong is that my cable is old and I should try someone else's AP.
But actually, I got a map successfully flashed onto my car, but when I'd try to start it, it just kept cranking. So I tried to flash another map and I get the same error. But oddly enough, everytime there was an error and I unplugged the AP and tried to reinstall the map, it would just start where it left off... So if the map was at 10% when the error occured, it would start again at 10% and go onto 22%. So I don't know if that means anything. But.....
Does anyone in the Santa Cruz area have a Cobb AP cable to lend for a little bit?
So I talked to Cobb and they didn't mention anything about sending my ECU to them.
What they think is wrong is that my cable is old and I should try someone else's AP.
But actually, I got a map successfully flashed onto my car, but when I'd try to start it, it just kept cranking. So I tried to flash another map and I get the same error. But oddly enough, everytime there was an error and I unplugged the AP and tried to reinstall the map, it would just start where it left off... So if the map was at 10% when the error occured, it would start again at 10% and go onto 22%. So I don't know if that means anything. But.....
Does anyone in the Santa Cruz area have a Cobb AP cable to lend for a little bit?