AP Help. ALREDY MARRIED?!??!?!
Thread Starter
Registered User
iTrader: (13)
Joined: Jul 2006
Posts: 448
From: bay area, ca
Car Info: 02 wagon
sup everybody, i posted in the EM forum and got a few hits but nothing too helpful, seeing if anyone local can give me a hand.
well i finally got my tbe /up to run stage 2 today, i put everything on and went to flash my base & real maps, but when i go plug it in it says that the car is already using an AP map!!!! from my knowledge the car was bone stock that i bought from a dealer and i know that the previous owner had the car repo'd. what do i do now? i tried to flash the stock map with my AP but it won't let me because it's already married! i'm not sure what to do, the car drives great and pulls great, there are no CEL's (yet) , does anyone have any experience with this? any help would be great, thanks everyone. i'm running an 02 wagon w/ cali stage 2 . let me know what i can do, thanks!
well i finally got my tbe /up to run stage 2 today, i put everything on and went to flash my base & real maps, but when i go plug it in it says that the car is already using an AP map!!!! from my knowledge the car was bone stock that i bought from a dealer and i know that the previous owner had the car repo'd. what do i do now? i tried to flash the stock map with my AP but it won't let me because it's already married! i'm not sure what to do, the car drives great and pulls great, there are no CEL's (yet) , does anyone have any experience with this? any help would be great, thanks everyone. i'm running an 02 wagon w/ cali stage 2 . let me know what i can do, thanks!
Registered User
iTrader: (15)
Joined: Aug 2005
Posts: 12,522
From: Salinas, CA
Car Info: 1997 Acura Integra GS Sedan
find someone with openECU (cable you can buy for about 80 bux) and have them flash a stock rom onto your ECU, it'll kill the AP software and allow you to marry the new AP to it.
Registered User
iTrader: (15)
Joined: Aug 2005
Posts: 12,522
From: Salinas, CA
Car Info: 1997 Acura Integra GS Sedan
yeah, the maps are stored on the AP, not the ecu, the ecu houses whatever map the AP put on it last. But yeah, be sure to flash your map (check to make sure the revision is correct) to the stock map (matching revision) and you should be good to go, you can even test marrying the AP to it before you get to the shop to save the shop 20 minutes (=
btw, where are you going to get tuned, hopefully it's GST Motorsports (=
btw, where are you going to get tuned, hopefully it's GST Motorsports (=
Thread Starter
Registered User
iTrader: (13)
Joined: Jul 2006
Posts: 448
From: bay area, ca
Car Info: 02 wagon
yea i'm looking forward to going to GST, i was going to run the stage 2 for awhile until i get my upgraded turbo setup in , and then go tune and see what kind of fun i can have then
hehe , thanks for all of the help! i owe you a beer.
-Don
hehe , thanks for all of the help! i owe you a beer.-Don
Registered User
iTrader: (15)
Joined: Aug 2005
Posts: 12,522
From: Salinas, CA
Car Info: 1997 Acura Integra GS Sedan
Originally Posted by boostfed
yea i'm looking forward to going to GST, i was going to run the stage 2 for awhile until i get my upgraded turbo setup in , and then go tune and see what kind of fun i can have then
hehe , thanks for all of the help! i owe you a beer.
-Don
hehe , thanks for all of the help! i owe you a beer.-Don
iClub Silver Vendor
iTrader: (25)
Joined: Nov 2002
Posts: 15,494
From: Participating in some Anarchy!
Car Info: 2005 LGT wagon
Originally Posted by SubyN00by
not a prob, just buy mike a beer, I owe him one anyway, and slap greg around a little (=
Spank Moike.
Registered User
iTrader: (15)
Joined: Aug 2005
Posts: 12,522
From: Salinas, CA
Car Info: 1997 Acura Integra GS Sedan
Originally Posted by boostfed
oh yeah, can GST flash me back to stock before i get a protune?
Thread
Thread Starter
Forum
Replies
Last Post
subieking05
Engine Management
0
Jun 4, 2006 05:48 PM



