Anyone have Defi install instructions?
Registered User
iTrader: (6)
Joined: Nov 2002
Posts: 406
From: Oooh, never mind!
Car Info: Not a subie!
Originally posted by 1WRX2NV
Sorry, it was late and I was tired, I worked on my call ALL DAY.....so
to me lol.
Thanks for the info. I will look at it now that I am awake
-freddie
Sorry, it was late and I was tired, I worked on my call ALL DAY.....so
to me lol. Thanks for the info. I will look at it now that I am awake

-freddie
But like I posted earlier, the best place is to tap the radio power. If you have an aftermarket radio this is easy with a harness. No need to tap any of the factory wires.
Anthony
Thread Starter
Registered User
iTrader: (15)
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
ok I finally got a chance to TRY to hook them up...but before I conect these please tell me if this is correct...
Defi controll unit wires: OEM Clock Plug wires:
RED -- BAT
BLACK -- GND
ORANGE -- LIG
WHITE -- ACC
I am not sure if I have the ORANGE and WHITE correct...please let me know
thanks
-freddie
Defi controll unit wires: OEM Clock Plug wires:
RED -- BAT
BLACK -- GND
ORANGE -- LIG
WHITE -- ACC
I am not sure if I have the ORANGE and WHITE correct...please let me know
thanks
-freddie
That's it Davon... You better not go to UCKK next week... And if you do, you better wear a cup... Because my foot is gonna connect with your ***** in a swift manner...
Originally posted by AWD 20T
That's it Davon... You better not go to UCKK next week... And if you do, you better wear a cup... Because my foot is gonna connect with your ***** in a swift manner...
That's it Davon... You better not go to UCKK next week... And if you do, you better wear a cup... Because my foot is gonna connect with your ***** in a swift manner...
Thread Starter
Registered User
iTrader: (15)
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
thanks Dan,
I have a different control unit. It had "play", "select", ect....
But for now I just put it under the pod
fit too.
Just finished up and it seems to work.
Now, the boost goes to "0" when I turn on the key (after the sweep), but then I start it...it goes down. When I give it gas...it goes to "0" again...no higher. (reving in the driveway). Is that normal?
thanks guys for all your help
-freddie
I have a different control unit. It had "play", "select", ect....
But for now I just put it under the pod
fit too. Just finished up and it seems to work.
Now, the boost goes to "0" when I turn on the key (after the sweep), but then I start it...it goes down. When I give it gas...it goes to "0" again...no higher. (reving in the driveway). Is that normal?
thanks guys for all your help

-freddie
2006 Mt Hammy Car Show Winner
iTrader: (11)
Joined: Dec 2002
Posts: 2,730
From: Danville, CA
Car Info: Black 03 WRX, White 04 E46 M3
Originally posted by 1WRX2NV
thanks Dan,
I have a different control unit. It had "play", "select", ect....
But for now I just put it under the pod
fit too.
Just finished up and it seems to work.
Now, the boost goes to "0" when I turn on the key (after the sweep), but then I start it...it goes down. When I give it gas...it goes to "0" again...no higher. (reving in the driveway). Is that normal?
thanks guys for all your help
-freddie
thanks Dan,
I have a different control unit. It had "play", "select", ect....
But for now I just put it under the pod
fit too. Just finished up and it seems to work.
Now, the boost goes to "0" when I turn on the key (after the sweep), but then I start it...it goes down. When I give it gas...it goes to "0" again...no higher. (reving in the driveway). Is that normal?
thanks guys for all your help

-freddie
Thread Starter
Registered User
iTrader: (15)
Joined: Nov 2002
Posts: 4,962
From: watching you get smaller...in my rear-view
Car Info: 02 STi
no, but it is the first "electric" boost gauge. Also, it didnt have Vacuum...just PSI.
I was just wondering cause I played with the controll unit...and didnt know if I set it to a limit or something. I drove it last night and it works fine.
thanks
-freddie
I was just wondering cause I played with the controll unit...and didnt know if I set it to a limit or something. I drove it last night and it works fine.
thanks
-freddie
the artist formerly known as mcdrama
iTrader: (23)
Joined: Apr 2004
Posts: 6,428
From: Santa Cruz Mountains, CA.
Car Info: WRBP 2015 WRX Premium/CVT
BUMP!!!
Thank you Freddie!
Defi controll unit wires: OEM Clock Plug wires:
RED -- BAT
BLACK -- GND
ORANGE -- ACC
WHITE -- LIG
I now have my new boost gauge setup.
Now I just need EGT and I will be SET!
Thank you Freddie!
Defi controll unit wires: OEM Clock Plug wires:
RED -- BAT
BLACK -- GND
ORANGE -- ACC
WHITE -- LIG
I now have my new boost gauge setup.
Now I just need EGT and I will be SET!
Thread
Thread Starter
Forum
Replies
Last Post
jamestaWRX
Hawaii Classifieds
9
Aug 20, 2006 10:24 PM
igalwrx
Interior, Exterior & Lighting
2
Jan 10, 2005 01:36 PM
MPOWERD
Interior, Exterior & Lighting
0
Mar 20, 2003 09:48 AM



