Any Suggestions? (Differential Filler Plug)
Thread Starter
Registered User
iTrader: (2)
Joined: Aug 2008
Posts: 396
From: SF bay area
Car Info: 2004 Subaru WRX
Tried everything it wont come off.. WD40 doesnt work, full force don't work.. I do not have a impact gun, the insert of the 1/2" is starting to get damaged, 1/2" ratchet drive has taken a beating , and losing patience.. Any suggestions would help.. Thanks.....
Thread Starter
Registered User
iTrader: (2)
Joined: Aug 2008
Posts: 396
From: SF bay area
Car Info: 2004 Subaru WRX
tried to put in a pipe on the ratchet already.. its really damn stuck in there.. The bad thing is , I got the bottom one off and all the fluid is already out so i cant even drive to the dame store !!! damn this is worse than a fix it ticket, lol
Registered User
iTrader: (4)
Joined: Nov 2005
Posts: 888
From: Bay Area, CA
Car Info: Steel Gray 2006 STi MBP 2012 Impreza Sport
if you're using the liquid stuff to loosen it make sure you close the bottom part, don't want that stuff going inside your diff
Registered User
iTrader: (57)
Joined: Aug 2006
Posts: 7,380
From: the area
Car Info: 04 impreza wrx R.I.P Daniel Wentz JOEBOBBUCKET
he cant drive it.... but i just did a diff service on my car and i used a 2ft breaker bar and it worked fine. i have about 95k on my car and the last time i serviced the diff was about 15k miles ago
if you are starting to strip the plug itself, I wouldn't use an impact wrench. The force from it will totally strip the plug.
Get a 1/2" breaker with a pipe AND get another person. One person has to be under the car to make sure the 1/2" breaker is in there nice and square.
Good luck, you should've loosened the fill before the drain plug.
Get a 1/2" breaker with a pipe AND get another person. One person has to be under the car to make sure the 1/2" breaker is in there nice and square.
Good luck, you should've loosened the fill before the drain plug.
Thread Starter
Registered User
iTrader: (2)
Joined: Aug 2008
Posts: 396
From: SF bay area
Car Info: 2004 Subaru WRX
ill try to borrow an impact gun from my friend.. ill borrow a 3ton floor jack from my work.. It wouldve really been easier to take it to the shop really, but i was short on $, ill buy a breaker bar , and i'll definately need to start working out lol , ill try to get like a wooden block underneath the diff on top of the jack to see what i can do.. unfortunately the inside thread is starting to mess up, i'll probably need to buy the fill plug down the street ( capitol subaru ) good thing i have a commuter beater .. Thanks for all your help, ill let you guys know how it goes
thanks
thanks


