Anouncing Method 4 Motorsports! (Updated Name)
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Hey guys, we are having to dellay the opening just a bit. We ended up bailing on our original location as we found a much nicer space. The new 5000 sq. ft. space is located in San Francisco about 1/4 mile off the 101, just off of 3rd street. The space is bigger, nicer, and in a more apropriate area than the previous space, so we could not pass it up. We know that some of you don't like to drive your nice cars through the city, so the fact that the space is very close to the freeway and that all the streets leading to the shop are newly paved and very smooth, were the final factors in our decision to go for this space.
So now to the relatively bad news. We have to postpone the grand opening untill just after the holidays. Right now we're debating weather to open just after Christmas or to wait untill the new year. At the latest, the grand opening will be on the first Saturday of January, but I will keep you guys updated when the date is actually set.
As far as the website, we're switching hosting providers as well as getting a nice page designed, so bear with us
.
Thanks
So now to the relatively bad news. We have to postpone the grand opening untill just after the holidays. Right now we're debating weather to open just after Christmas or to wait untill the new year. At the latest, the grand opening will be on the first Saturday of January, but I will keep you guys updated when the date is actually set.
As far as the website, we're switching hosting providers as well as getting a nice page designed, so bear with us
.Thanks
Last edited by MethodBuilt; Dec 4, 2006 at 10:46 AM.
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Originally Posted by Mr. Furley
Will you be building motors Ed?? or do you know someone reputable that does?
Thanks
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Originally Posted by subie OCD
Any idea when tuning appointments can be made?
Thanks
Thread Starter
iClub Silver Vendor
iTrader: (12)
Joined: Mar 2003
Posts: 8,228
From: 631 Railroad Ave. Fairfield, CA
Car Info: A Laptop
Originally Posted by jdadour
i call shotgun on the first dyno tune!!!! 
Hey guys, ANNOUNCEMENT time!
The new address is.... 1350 Yosemite Ave, San Francisco, 92124
3rd Street exit off of 101 and about half a mile off the highway. 3rd St to Yosemite is really nice, smooth, new pavement and it's divided down the center. Don't worry about the coilovers, this isn't a 'typical' San Francisco street
Map Link!
...we're cleaning up the shop right now and getting the desks and couches and whatnot ready. The lifts (4) are arriving next week on Wednesday, and the dyno within a week or two after. As soon as the lifts (and tools, compressor, etc) are ready, we'll begin doing service/install work in the new shop. Hopefully that'll be the end of next week or early the week after. The alignment rack and other goodies will be showing up in this timeframe as well.
Not locked down yet, of course, but my best guess is that the "Grand Opening" when the dyno is calibrated and ready and everything else is good to go, will be in early January... unless we get lucky
Jeremy
The new address is.... 1350 Yosemite Ave, San Francisco, 92124
3rd Street exit off of 101 and about half a mile off the highway. 3rd St to Yosemite is really nice, smooth, new pavement and it's divided down the center. Don't worry about the coilovers, this isn't a 'typical' San Francisco street
Map Link!
...we're cleaning up the shop right now and getting the desks and couches and whatnot ready. The lifts (4) are arriving next week on Wednesday, and the dyno within a week or two after. As soon as the lifts (and tools, compressor, etc) are ready, we'll begin doing service/install work in the new shop. Hopefully that'll be the end of next week or early the week after. The alignment rack and other goodies will be showing up in this timeframe as well.
Not locked down yet, of course, but my best guess is that the "Grand Opening" when the dyno is calibrated and ready and everything else is good to go, will be in early January... unless we get lucky
Jeremy
