About to Install a Godspeed Inlet
#1
Registered User
Thread Starter
Join Date: Nov 2011
Location: Salinas
Posts: 1,502
Car Info: 2003 WRX Wagon EJ25
About to Install a Godspeed Inlet
So my stock turbo inlet has torn and is making a whistling noise. I ordered a Godspeed inlet. Im pretty nervous about this install, mostly about taking the vacuum lines off the old one and getting them back on the new one correctly. Does anyone have any advice or tips to help with the install?
#2
previously known as wrxBRAH
iTrader: (17)
Join Date: Sep 2010
Location: San Jose / Campbell
Posts: 3,383
Car Info: 2004 FXT
So my stock turbo inlet has torn and is making a whistling noise. I ordered a Godspeed inlet. Im pretty nervous about this install, mostly about taking the vacuum lines off the old one and getting them back on the new one correctly. Does anyone have any advice or tips to help with the install?
#3
Not sure I may be wrong here as I don't know the size, but if this inlet is bigger / flows more than stock you will want to get a tune before you do any wide open throttle driving, possibly any driving at all.
#4
If in doubt, FLAT OUT
iTrader: (33)
Join Date: Oct 2010
Location: Nor Cal SJ
Posts: 7,035
Car Info: 2010 Hatch, 2011 Sedan
Take pictures of every step including BEFORE you touch anything, so you know how things go back together.
Unfortunately, wrxBRAH is correct, you should remove the manifold if you don't want to be kicking yourself.
Unfortunately, wrxBRAH is correct, you should remove the manifold if you don't want to be kicking yourself.
#6
Registered User
Thread Starter
Join Date: Nov 2011
Location: Salinas
Posts: 1,502
Car Info: 2003 WRX Wagon EJ25
I know it makes things easier but that totally freaks me out. I've never done anything to that extent on my car.
#7
Registered User
Thread Starter
Join Date: Nov 2011
Location: Salinas
Posts: 1,502
Car Info: 2003 WRX Wagon EJ25
#8
#9
Registered User
iTrader: (6)
Join Date: Jul 2011
Location: Sacramento, CA
Posts: 383
Car Info: 2003 WRX
I installed my Perrin inlet without removing the manifold. I HIGHLY recommend doing it this way rather than removing the manifold. The Godspeed inlet is silicone so you should have no problem wiggling it in. Making the connection to the compressor is the most frustrating part so just take your time.
Removing the manifold if you don't absolutely have to is a waste of time and money (gaskets). Just have a game plan for what vacuum lines go where (on the new inlet) before you begin and you will be fine. You should be able to find some install guides online just do a quick search. Also read Godspeeds instructions to see how the recommend hooking up the vac lines (if there are less connections on the new inlet).
Removing the manifold if you don't absolutely have to is a waste of time and money (gaskets). Just have a game plan for what vacuum lines go where (on the new inlet) before you begin and you will be fine. You should be able to find some install guides online just do a quick search. Also read Godspeeds instructions to see how the recommend hooking up the vac lines (if there are less connections on the new inlet).
#10
Registered User
iTrader: (5)
I wouldn't imagine you'd need a tune for doing ONLY an inlet, but if you're going to get a tune, do all of this at once and get your tune done 1 time, instead of for each part that requires it.
#11
If in doubt, FLAT OUT
iTrader: (33)
Join Date: Oct 2010
Location: Nor Cal SJ
Posts: 7,035
Car Info: 2010 Hatch, 2011 Sedan
I installed my Perrin inlet without removing the manifold. I HIGHLY recommend doing it this way rather than removing the manifold. The Godspeed inlet is silicone so you should have no problem wiggling it in. Making the connection to the compressor is the most frustrating part so just take your time.
Removing the manifold if you don't absolutely have to is a waste of time and money (gaskets). Just have a game plan for what vacuum lines go where (on the new inlet) before you begin and you will be fine. You should be able to find some install guides online just do a quick search. Also read Godspeeds instructions to see how the recommend hooking up the vac lines (if there are less connections on the new inlet).
Removing the manifold if you don't absolutely have to is a waste of time and money (gaskets). Just have a game plan for what vacuum lines go where (on the new inlet) before you begin and you will be fine. You should be able to find some install guides online just do a quick search. Also read Godspeeds instructions to see how the recommend hooking up the vac lines (if there are less connections on the new inlet).
#12
Loves the Anime
iTrader: (12)
I installed my Perrin inlet without removing the manifold. I HIGHLY recommend doing it this way rather than removing the manifold. The Godspeed inlet is silicone so you should have no problem wiggling it in. Making the connection to the compressor is the most frustrating part so just take your time.
Removing the manifold if you don't absolutely have to is a waste of time and money (gaskets). Just have a game plan for what vacuum lines go where (on the new inlet) before you begin and you will be fine. You should be able to find some install guides online just do a quick search. Also read Godspeeds instructions to see how the recommend hooking up the vac lines (if there are less connections on the new inlet).
Removing the manifold if you don't absolutely have to is a waste of time and money (gaskets). Just have a game plan for what vacuum lines go where (on the new inlet) before you begin and you will be fine. You should be able to find some install guides online just do a quick search. Also read Godspeeds instructions to see how the recommend hooking up the vac lines (if there are less connections on the new inlet).
i had a samco one and installed it back in the day. no problems.
The proper way is to remove the manifold, but that is only if you are looking keep the oem inlet. the area where the inlet connects to the clamp is pretty thin on the oem one and it tends to rip and will cause vaccum leaks. You'd probbaly be best to ditch the old one anyway. When i installed my samco one.. i ended up just cutting up and destroying the oem one taking it out.That is probably the most difficult part of the install is taking out the old one. the new one is flexible and easier to maneuver.
#13
Registered User
Thread Starter
Join Date: Nov 2011
Location: Salinas
Posts: 1,502
Car Info: 2003 WRX Wagon EJ25
I think I can manage it, im just not 100% sure on fitment/what goes where, it looks like some people end up adding extensions for the pcv line and some dont...idk as long as this ends up being easier than replacing the turbo oil drain hose I should be fine. I think if I could find a step by step guide I would be all ready, Ill have a buddy to help so Im feeling better taking this on.
Ill probably either take pictures of what goes where or label the lines on where the go on the inlet.
Ill probably either take pictures of what goes where or label the lines on where the go on the inlet.
#14
Registered User
Thread Starter
Join Date: Nov 2011
Location: Salinas
Posts: 1,502
Car Info: 2003 WRX Wagon EJ25
^^ this..
i had a samco one and installed it back in the day. no problems.
The proper way is to remove the manifold, but that is only if you are looking keep the oem inlet. the area where the inlet connects to the clamp is pretty thin on the oem one and it tends to rip and will cause vaccum leaks. You'd probbaly be best to ditch the old one anyway. When i installed my samco one.. i ended up just cutting up and destroying the oem one taking it out.That is probably the most difficult part of the install is taking out the old one. the new one is flexible and easier to maneuver.
i had a samco one and installed it back in the day. no problems.
The proper way is to remove the manifold, but that is only if you are looking keep the oem inlet. the area where the inlet connects to the clamp is pretty thin on the oem one and it tends to rip and will cause vaccum leaks. You'd probbaly be best to ditch the old one anyway. When i installed my samco one.. i ended up just cutting up and destroying the oem one taking it out.That is probably the most difficult part of the install is taking out the old one. the new one is flexible and easier to maneuver.
#15
I have a brand NEW never used APS 3" hard pipe kit, they stop making these years ago. I sold my STi and found it in my garage, anyone interested $400 takes her home. Best turbo inlet made to date, fitment is spot on and has 2.4" adaptor if needed!