In the overwhelming response to my other thread on Stromung Exhausts I thought that I would help everyone out and shrink down the thread since it was approaching 30 pages!!

So I will recap all of the pricing here and then post the pics that I have taken or had taken by some great people on here.

All prices are shipped in the lower US...if you need shipping quotes for outside or HI then please let me know and I will get you one. :)

**Note-XA Tip is 3 1/2in Angle Cut Tip that is lighter then the regular Single Tip but just a little louder then the regular.**

WRX
Axle Back 2.5 in.
Dual Tip - $435
Single Tip - $405
NEW XA Tip - $375
Intermediate Pipe - $160

3rd Cat Eliminator - $180
2.5in Down Pipe: w/ cat - $275, w/o cat - $195

Cat-Back 2.5in.
Dual Tip - $595
Single Tip - $565
NEW XA Tip (3 ½ in, Angle Cut) - $535

Cat-Back 3in.
Dual Tip - $645
Single Tip - $595
NEW XA Tip - $585

3in Downpipes
Primary DP w/wastegate - $195
Secondary DP w/high flow cat - $345
Secondary DP w/no cat (racepipe) - $225

Turbo-Back 2.5in. (Down Pipe, 3rd cat eliminator, Mid Pipe, muffler)
Dual Tip w/Cat - $1050
Single Tip w/Cat - $1020
Dual Tip w/o Cat - $970
Single Tip w/o Cat - $940

CHECK THE LAST PAGE OF THREAD FOR THE LATEST SALES GOING ON CURRENTLY!!!

NEW ITEM!!
Turbo-Back 3in
Dual Tip w/Catpipe - $1185
Single Tip w/Catpipe - $1135
Dual Tip w/Racepipe (no cats) - $1065
Single Tip w/Racepipe (no cats) - $1015

IMPREZZA RS (ie. 98 & up)
Axle Back 2.25in
Dual Tip - $435
Single Tip - $405
NEW XA Tip - $375
Intermediate Pipe - $160

Cat Back
Dual Tip - $595
Single Tip - $565
NEW XA Tip - $535

High Flow Cat Pipe - $345

LEGACY
2.5in piping
Axle Back
Dual Tip - $435
Single Tip - $405
Intermediate Pipe (has resonator built in) - $210

Cat Back
Dual Tip - $645
Single Tip - $615

FORESTER
Single Tip Axle Back Only - $415


***NOTE- Please look to the latest post for the newest updates!! :) ***

To place an order send funds through PayPal to autransam@earthlink.net and I will take care of the rest!!

Let me know!!!

Thanks,
Brian

Flash N Dash Performance
autransam@earthlink.net

Here are a few great pics of the Dual Tip Full Turbo Back exhaust system! ;)

Some more pics...Dual, Single, and XA Tip.

Here are some pics of the 3rd Cat Eliminator Pipe for those that choose to go with the 2.5in Piping.

This is the High Flow Catpipe for the 2.5 RS.

Here are pics of the Downpipes next...first the 2.5in DP options....can be had with either a high flow cat or no cat at all. Produces great torque numbers for those who like to drag race! ;)

Now here is the 3in Downpipe with wastegate. Great HP numbers! :) Please note that the 3in DP only comes with no cats. There is no option for a High Flow cat here.

Hey Brian, does STROMUNG have a 3rd Cat Eliminator (3" all the way) ? If so, can they fit my HKS exhaust? I need a 3" flange to mate it perfectly because the stock DONUT gasket will leak eventually when I had my HKS exhaust on. How much for the 3" DP and 3" 3EC shipped to CA94015? How much for 3" DP(no cat) and 3" midpipe with high flow cat?

Andy

what would price be on a 3" DP with high flow cat plus the 3CE pipe in 3"?

Andy,

Hey Stromung does make a 3in pipe that eliminates the second cat. If you have the HKS cat back then if you were to get the 3in DP and 3in Secondary DP or racepipe as known then you should have no problems in theory.

The price of the 3in Primary DP and Secondary(racepipe) with no cats would be $405 shipped.

The price of the 3in Primary DP and Secondary DP with cats would be $535 shipped.

You do have the HKS cat back right? You didn't by some chance just get the rear muffler section did you? If you have the Cat back then one of the above prices will fit what you need! :)

Let me know if you have any questions and I will help you out through this. I look forward to hearing from you soon!

Thanks,
Brian

Flash N Dash Performance

Beeker - Just to be clear for everyone the 3in DP only comes with no cats in it. There is not an option for a High flow cat in the Primary DP piece. The next pipe that comes off of the Primary DP has the option to be had in either a High flow catpipe or a racepipe with no cat.

I listed the prices in the post above for what you were asking for. :) If you want a high flow cat in at least one of the two pipes then you would go for the Primary DP and Secondary DP w/high flow cat.

Let me know if you have any questions!

Thanks,
Brian

Flash N Dash Performance

P.S. Here is a pic of the 3in Primary DP and the Secondary DP (Racepipe) with no cats.

if i don't have paypal account, do you have any choices can make a payment? do you have any 1-800 number or phone number that i can talk to?

superrx - Hey PayPal is the only way that I can accept Credit Cards right now. Besides it is free and easy to use....very secure also. I have been using PayPal for over 6 years now and haven't had any trouble out of them. If you still don't want to use them then I do accept Money Orders too. If you would like to send a M.O. then let me know and I can give you the address.

If you need to contact me then feel free to call me at (334)826-2992 or (334)826-8240.

Let me know if you have any other questions! :)

Thanks,
Brian

Flash N Dash Performance

do you know how many shipping day to NYC?

superrx - It would only take 4-5 business days. If you want to give me your zip code I can punch it in and see exactly what it would be. :)

Brian

Flash N Dash Performance

zip code is 11223

superrx - That would be 5 business days. :) Not to long of a wait.

Let me know when you are ready to go. At this point in the week you would get it next week sometime anyways.

Thanks,
Brian

Flash N Dash Performance

for the stromung 3rd cat eliminator, is it required to get a new donut gasket?

methinkadoo - All of the Stromung pieces are ment to fit upto the stock pieces. So you wouldn't have to get any new parts. Now the 3rd cat Eliminator pipe is 2.5" so it will fit upto the stock pieces with no problems because the stock is 2.5".

Let me know if you have any other questions! :)

Thanks,
Brian

Flash N Dash Performance

Hey Brian,

You know if stormung has a policy on them? just wondering... not really stromungs fault but totalled my impreza and the way got hit shredded the intermidiate pipe (lol). Insurance or whereever my car is wont let me take the exhaust. So who knows if i can get the muffler ill order a new intermeidate pipe for my new impreza..... and to anyone looking for one get one sound great and bump for a great vendor!!

Chris

01-2.5RS - Hey Chris I don't think Stromung covers accidents I am sorry to say. You will just have to get a new one for your new car. Let me know when you are ready to go for those new parts. Sorry to hear about your car man....that is a true bummer. :(

Hope you are all right!

Thanks,
Brian

Flash N Dash Performance

how much for 3 inch waste gate dp catless race pipe and intermidiate pipe to hook up with stock muffler? on sti! silverfox1

silverfox1 - So you want to keep just the stock muffler section? Then you would need the Primary DP, Secondary DP with or without cat, and then the Intermediate pipe to connect to the rear muffler section. Is this what you want?? Let me know and I will get you pricing right away!

Thanks,
Brian

Flash N Dash Performance

hey brian, i have the espelir jgt500 exhaust on my STi, i was wondering if the 3rd cat eliminator will mate up to it. also, after removing that one cat, the STi will have 1 remaining cat, does that count as a stage2 car? or considered stage1?

methinkadoo - You have the Espelir Cat Back exhaust?? Do you know what size the piping is at that flange that connects to the catpipe? If it is 2.5in then I think it will work. I will talk to Stromung once I hear from you and see what is the best set up for you. :) I think it would be a Stage 1 still. When you go replacing all of the pipes and uppipe then it would be like a Stage 2.

Let me know and I will see what we can hook you up with!

Thanks,
Brian

Flash N Dash Performance

I believe it is 2.5 inch because it does mate up with the stock downpipe.

methinkadoo - Yeah then most likely the 3rd Cat Eliminator pipe will be the right choice to go with then. :) All of the Stromung pieces were built to mate up to the stock pieces. So you just want to replace the catpipe...you don't want to get the down pipe too??

Thanks,
Brian

Flash N Dash Performance

i was just afraid of getting some sort of boost creep. i was thinking maybe removing 1 cat will lessen the restriction enough that boost creep isn't present. i really dont want to PnP my wastegate if i don't have to. and i also want to pass emissions

methinkadoo - Yeah boost creep is a pain...and with removing one of the cats you will free up some of that. I understand passing emissioins...you must live out in CA or somewhere like that where you have the testing. Let me know when you are ready for the 3rd Cat Eliminator then! :)

Thanks,
Brian

Flash N Dash Performance

pmed you, please respond quickly.

Thanks

Aznboy1der - PM'd and emailed you bud! :) We will get this taken care of fast like for you! I look forward to hearing from you! Sorry it took so long today I was busy working on a car that was a pain! lol

Thanks,
Brian

Flash N Dash Performance

i need a price on 3'downpipe w/waste gate the next pipe which i believe is secondary dp without cat or race pipe and then the intermidiate pipe that will mate to my stock muffler and tail pipe for sti 04.total price shipped? thanks silverfox1

silverfox1 - Hey I talked to Stromung and they don't make an Intermediate Pipe that would fit the stock rear muffler section. Their Intermediate pipe is all 3in and you need a pipe that will taper down to 2.5in. I am looking into a company that makes an Intermediate pipe that starts out 3in then has a flex joint and then tapers down to 2.5in so it will bolt upto the stock muffler section. So I will let you know what I find out about this deal. Or you can always go with the full Turbo Back exhaust. What they have found when you go 3in all the way and then use the stock rear muffler it shows that it causes a lot of back pressure that is not needed or wanted. Just to let you know. So maybe now you have enough info to make a well informed decision on what it is you need to get. :) I hope this helps!

On a side note...Stromung has been doing a lot of dyno testing for the WRX and STI and have found that when it came to the STI they found higher HP numbers when they went with a DP without the separated wastegate. Don't ask me why but the numbers don't lie. So I would recommend that...there is no difference in the price but the numbers are different.

Let me know if you have any other questions! :)

Thanks,
Brian

Flash N Dash Performance

silverfox1 - Hey I made an edit to the above post on regards to your questions so check it out before you do anything! :)

Thanks,
Brian

Flash N Dash Performance

Stomung sale is still on!! :) Hurry end of the month is drawing near!

Brian

Flash N Dash Performance

so you said if i use 3" downpipe and 3"secondary or race pipe and intermidiate pipe that it wont mate up tp stock sti muffler correct?then if i were to go with 2.5 catless dp and catless race pipe and intermidate pipe than it would mate up properly to stock sti muffler correct? i would also like the primary dp ceramic coated. please help me out im new to the tuner scene! how much shipped to fla.?

silverfox1 - Yeah since the OEM WRX/STI piping is all 2.5in then if you were to get the Stromung 2.5in it would mate upto the rear muffler section. Just out of curiousity why are you wanting to keep the stock rear muffler?? Anyways I can't get the DP ceramic coated not that you would need it. The exhaust pieces are perfect just the way they are. It is an unnecessary procedure.

Now for the 2.5in Catless DP, 3rd Cat Eliminator pipe, and Intermediate pipe it would be $535 shipped! :)

Let me know what you think! This setup would work with your stock rear muffler!

Thanks,
Brian

Flash N Dash Performance

How much for an axle back shipped to Anchorage, Ak 99504

please give quotes for both of the single tip ones. thanks!

Psylas - Hey there! :) The Stromung 2.5in Single Tip Axle Back would be $395 shipped and the Stromung 2.5in XS Tip Axle Back would be $365 shipped. And these are the sale prices! ;)

Let me know if you need anything else! :)

Thanks,
Brian

Flash N Dash Performance

hi !you quoted me $535 shipped for the 2.5dp race pipe and intermediate pipe for my 04 sti.if i just get the dp now and the other two latter what will the price be on just the dp?what is the prices for each pipe separately and does this setup eliminate all the cats and what are the cel issues with this setup? if you can give me a better price on the three pipes together than that may be incentive to purchase together!!thanks ! siverfox1

silverfox1 - Yeah the price for the 3 pieces are cheaper then if you were to get them all separate. You save about $30 bucks this way! :) Let me know if you have any other questions!

Thanks,
Brian

Flash N Dash Performance

im looking for a cat and a cat back for my 98 RS. price break for ordering two things?
are these all stainless steel?
do these come with required gaskets and hardware?
pics of XA on GC?
CEL problems with cat? will you provide electrical or mechanical fix if there is a problem?
thanks
will

will98rs - Hey I am not understanding the two things that you are wanting to order. You want a catback for a 98 RS and what else? A cat?...cat back for WRX?? Let me know the exact two things you want and I will give you a better deal for the two if this is the case. I don't have any pics of the exhaust on a GC8 model. There is no CEL problems with a cat back. They do come with all hardware and gaskets needed to install.

Please let me know if you have any other questions! I look forward to hearing from you soon!

Thanks,
Brian

Flash N Dash Performance

maybe i dont understand the terms correctly. i am looking for a catalytic converter, intermediate pipe, and axle back. basicly everything after the headers.

this is all for my 1998 RS

will98rs - Cool! :) I figured out what you wanted. I emailed you the prices and pics. Let me know if you get them arlight!

Thanks,
Brian

Flash N Dash Performance

Do you have exhaust clips of the Single tip and the xa tip catless turboback? If so can you please send them to me at onewrx2goplz@yahoo.com Also what is the diamiter of the Single tip and the Xa tip (The tips itself)

1wrx2goplz - Sorry I don't have any sound clips of the Turbo Back. All I have is a clip of the Cat Back. The Single Tip is 3in and the XA Tip is 3.5in Angle Cut Tip. I hope that helps! Let me know if you want to hear the clip of the cat back and I can send that to your email! :)

Please let me know if you have any other questions!

Thanks,
Brian

Flash N Dash Performance

do u have clips of the XA tip and the normal Single tip catback then? If so can you plz send them to me at onewrx2goplz@yahoo.com Also can you send me pics of the single tip and the xa tip installed? So I know what it would look like from behind. Can you please have the whole car in the pic 2 plz.

Thanks
Mike

1wrx2goplz - Mike, Email sent! :) Let me know if you have any trouble receiving it!

Thanks,
Brian

Flash N Dash Performance

Yes i have recieved the email. Wow this exhaust makes the car sound like a monster haha. Just wondering if the Single tip and XA tip is louder then the duals?? Im definatly will keep You in mind when i have enough money to purchase a Stromung exhaust!

Thanks
Mike

never got an email :(

wgilmore (at) wesleyan (dot) edu

1wrx2goplz - Yeah it is a real monster! :) It really makes it sound like a bigger car and motor to all others! Everyone that has one loves the way it sounds! The Single and XA Tips are only a hair louder then that...but not much so don't worry about getting pulled over. ;)

will98rs - Mmmmm....well I am resending the emails for you. Let me know if you get them alright.

Thanks,
Brian

Flash N Dash Performance

got the emails thanx

will98rs - Cool! :) I am glad! Let me know what you think on the deal bud!

Thanks,
Brian

Flash N Dash Performance

1wrx2goplz - Yeah it is a real monster! :) It really makes it sound like a bigger car and motor to all others! Everyone that has one loves the way it sounds! The Single and XA Tips are only a hair louder then that...but not much so don't worry about getting pulled over. ;)

Flash N Dash Performance


Yea that is my only concern is getting pulled over. Youd wouldn't happen to know how much decibles the exhaust is at idle and 4-5k rpm?

Thanks
Mike

1wrx2goplz - No I sure wouldn't. There has not been any formal measurement of the DB level. This exhaust is made in CA and they have done all kinds of testing. They have to put up with the strict conduct of the CA police and we have had a ton of customer buy these exhausts that live in CA and have not had any problems with the sound. Also I have had a bunch tell me that the cops look at the overall car more then just the sound of your exhaust. If you look like your car should be in the Fast and the Furious then it just draws attention that causes them to then look to the exhaust as one of the main writeups. I hope this helps!

Let me know if I can do anything further for you! :)

Thanks,
Brian

Flash N Dash Performance

1wrx2goplz - No I sure wouldn't. There has not been any formal measurement of the DB level. This exhaust is made in CA and they have done all kinds of testing. They have to put up with the strict conduct of the CA police and we have had a ton of customer buy these exhausts that live in CA and have not had any problems with the sound. Also I have had a bunch tell me that the cops look at the overall car more then just the sound of your exhaust. If you look like your car should be in the Fast and the Furious then it just draws attention that causes them to then look to the exhaust as one of the main writeups. I hope this helps!

Let me know if I can do anything further for you! :)

Thanks,
Brian

Flash N Dash Performance



Well i wish cops were like that around here. I was state refed from a cop because my exhaust was to loud. I had the HKS carbon TI and Helix dp/up combo. I was lucky he didnt search for a cat. Thats why i went and bought a borla Hush but it is too quiet for me and i want something a tab bit louder but i dont wanna get pulled over because my exhaust is to loud. And no my car doesnt have any fast and furious stuff on it. It looks stock from the outside ;)

1wrx2goplz - Yeah that HKS is a loud one! :) I think that you will be happy with the level of sound you get out of the Stromung. Most people go with the Dual Tip because it is a hair quieter and it looks like a stock exhaust. On a scale of 1 to 5, with 5 being the loudest the HKS would be a 5 and the stock would be a 1 and the Borla Hush would be 2 with the Stromung's being about a 3-3.5

I hope that helps!

Thanks,
Brian

Flash N Dash Performance

O yea i forgot to ask. Is this exhaust C.A.R.B legal?? Does it come with any C.A.R.B papers?

1wrx2goplz - Not that I am aware of...in fact I don't know any exhausts that are CARB certified. Many intakes aren't even CARB certified. Not to say that it wouldn't pass, but I think they just don't take the time and the cost to go through that process.

Thanks,
Brian

Flash N Dash Performance

can i have a quote shipped to 94590 for the 3" XA tip cat back plz?

Thanks
Mike

1wrx2goplz - Sure thing! The 3in XA Tip Catback for the WRX would be $570 shipped!

To place this order send funds throgh PayPal to autransam@earthlink.net and I will take care of the rest!

So you don't want to go with the complete Turbo Back??

Thanks,
Brian

Flash N Dash Performance

Just thought I'd help with a sound clip of my 3" stromung dp with divorced wastegate, stock 3rd cat, stock intermediate pipe, prodrive axle back.

outside of car - 10 feet away (http://web.njit.edu/~mcl3/wrx/stromungDP_prodriveAXLEBACK.AVI)

1/4 mile run in car (http://web.njit.edu/~mcl3/wrx/infamousdx.AVI)

InfamousDX - Sweetness! :) Thanks Mike for the help with the sound clip!

Brian

Flash N Dash Performance

Sent ya a pm.

GoFast04 - Got it! :) Tag your it!

Thanks,
Brian

Flash N Dash Performance

So what is the difference between the XA and single tip? and are these still 2.5 inch, just bigger tail pipe?
Help! cause I really want a 2.5" stromung for my WRX. =)

mcdrama - The Single tip is a straight cut rolled tip and it is 3in. The XA Tip is angle cut non-rolled tip that is 3.5in. And yes you can still get either of the tips in 2.5in piping or 3in piping. The prices in the first thread break down the difference in pricing. Or you can let me know what you want....ie Axle Back, Cact Back, or Turbo Back and I will give you a price! :) Let me know if you have any questions!

Thanks,
Brian

Flash N Dash Performance

sent ya an im

GoFast04 - You sent an IM or a PM? Cuz I got your PM and just replied.

Thanks,
Brian

Flash N Dash Performance

SPECIAL SALE FOR ALL STROMUNG TURBO BACKS!!! FOR THE MONTH OF JULY TAKE $50 OFF AN ALREADY LOW PRICE!!! AND FREE SHIPPING!!

Yup you heard right!! This is the lowest price ever offered and this won't be an ongoing deal! This month only! Hurry time is limited!

Thanks,
Brian

Flash N Dash Performance

Two Turbo Back Systems already spoken for! :) Don't wait for yours!! You don't want to be kicking yourself for not jumping on this deal! ;)

Plenty more to go around! Place your orders now!

Thanks,
Brian

Flash N Dash Performance

Is it still $435 for the Axle Back 2.25in Dual Tip?

-Mark

Brian would you happen to have any used 2.5" 3rd cat eliminators? I'm working on something custom and I need one but it's gonna be hacked up so I can't justify spending a lot.

White Knight - With the sale it would actually be $425 shipped! ;) But yes it is still available! Let me know if you want one!

InfamousDX - Mike, I don't have any used ones but I will keep an ear/eye out for it!

Thanks,
Brian

Flash N Dash Performance

What are the HP gains on the dual tip turboback ?

notyetaracer - They are showing around 28+ HP gains from their 3in Turbo Back! :) Pretty cool numbers! Let me know if you would like one at the great sale price!!!

Thanks,
Brian

Flash N Dash Performance

are u still selling the exhausts. if so i would like to buy a stromung type xa catback asap.

rsracer2005 - Yup you can still get them from me! :) I am not going anywhere! ;) I sent you a PM with ordering instructions!

Let me know if you have any questions!

Thanks,
Brian

Flash N Dash Performance

when i send the money how will you know which order is mine.

rsracer2005 - Check your PM's! :)

Thanks,
Brian

Flash N Dash Performance

how much would it cost for a 3" dp with waste gate and a 3" racepipe (i currently have a 3"greddy catback) shipped to 23320?

simpwrx02 - Hey there! :) That would be $420 shipped! To place this order send funds through PayPal to autransam@earthlink.net and I will take care of the rest!

Let me know if you have any questions!

Thanks,
Brian

Flash N Dash Performance

How much for a 3" TBE with dual tip shipped to 19390?

thx.

SooKy - Did you want it with a high flow catpipe or racepipe with no cats??

The prices are as follows...and this is with the sale price special! :)

3in Dual Tip w/catpipe - $1135 shipped
3in Dual Tip w/racepipe - $1015 shipped

To place an order send funds through PayPal to autransam@earthlink.net and I will take care of the rest! Let me know if you have any questions!

Thanks,
Brian

Flash N Dash Performance

If i get the racepipe will i still have 1 cat left? I also have a helix upipe.. thx.

SooKy - If you get the racepipe then you will have no cats left in the main exhaust system. It will take out the two cats there. And with the Helix unless they have a high flow cat then you have already removed that one as well. You will be running with max HP though! :) I am running without cats on mine and it is great...and I haven't had any problems from it. Let me know what you think and if you have any other questions!

Thanks,
Brian

Flash N Dash Performance

Does Stromung now make the Type XA in dual tip?
I found this pic online from another vendor.

http://store.xxtuning.com/images/stro-exhasut1.jpg

Can you get this?

TT

TastyTurbo - Hey that looks like just a regular pic of the Dual Tip. The XA tip is a single angle cut tip with the edges of the tip NOT rolled. But I will talk to Stromung tomorrow and see what I can find out about that. I will let you know something then! :)

Thanks,
Brian

Flash N Dash Performance

What kind of power difference will there be with the turboback with a cat as opposed to the racepipe with no cat?

powderdtoastman - You will generally see about a 4 HP difference between the two with the racepipe producing the most HP. :) I hope this helps! Let me know if you have any questions! You can still get $50 off any Turbo Back right now so hurry! ;) Won't last to much longer!

Thanks,
Brian

Flash N Dash Performance

TastyTurbo - Oh and I meant to tell you that I checked with Stromung and they only have a Single XA Tip no Dual at the time. So there is a Dual Tip, Single Tip, and Single XA Angle cut Tip. I hope this helps! :)

Thanks,
Brian

Flash N Dash Performance

FOR THE REST OF AUGUST TAKE $50 OFF ANY TURBO BACK SYSTEM!!!! HURRY!!!

Due to the popularity of this sale I have decided to continue this crazy sale for just another month!! After this month it will disappear FOR EVER!!!!

Thanks,
Brian

Flash N Dash Performance

do you have the 2.25inch mid pipe for the 2003 2.5RS models?

HIDPlace.com - Yes we are actually getting in a shipment today that we have been waiting on. It seems that the 2.5RS has spiked in popularity this month! :) Let me know if you need one!

Thanks,
Brian

Flash N Dash Performance

if you can get for me the week of August 20th (AKA till Friday) I'll order it ... b/c I have a leak in my exhaust now and it sounds like crap!!!!

HIDPlace.com - Well it would ship out on Monday so it depends on how long it takes from CA to where you are as to if you will get it by Friday. If you are in NY like your thing says then it would take 5 days ground. So to get it to you by Friday you would need to get it 3 Day Select which would be $10 more. The shipment did come in today so let me know. :)

Thanks,
Brian

Flash N Dash Performance

how much for a high flow cat shipped to 80027 for a 2.5rs? thanks alot.

rsracer2005 - Yup you have a PM waiting! :) Let me know when you want this bad boy!

Thanks,
Brian

Flash N Dash Performance

Just 6 more days to go on the Turbo Back sale!! :) DON'T MISS OUT!!!

If you have any questions or comments about this sale then please don't hesitate to ask!!!

Thanks,
Brian

Flash N Dash Performance

will98rs - You have a PM waiting! :)

Thanks,
Brian

Flash N Dash Performance

Does tax apply when i make a purchase. I am in California.

powderdtoastman - Nope! :) Sure doesn't! So go ahead and place your order and we will get one rolling to you!

Let me know if you have any other questions!

Thanks,
Brian

Flash N Dash Performance

Brian is the man. Thanks for processing my order and setting up shipping so quickly.

RussB - Thanks bud! :) I left feedback under your profile and you can feel free to post something there too so it will be where everyone can see!

Thanks,
Brian

Flash N Dash Performance

do u have clips of the XA tip and the normal Single tip catback then? If so can you plz send them to me at onewrx2goplz@yahoo.com Also can you send me pics of the single tip and the xa tip installed? So I know what it would look like from behind. Can you please have the whole car in the pic 2 plz.

Thanks
Mike

Brian,

Can you send me these as well... kreynoso@gmail.com

Also, are the XA cat-back for the Impreza RS in stock? I'm planning to place an order soon.

Thanks,
Karl

Karl,

Hey I don't have any sound clips of those...just the Dual tip. And we do have the one you want in stock so place the order when ready! :) You won't be disappointed with the sound at all!

Thanks,
Brian

Flash N Dash Performance

Order sent!

Thanks,
Karl

kitsune713 - Got it! :) Thank you for your support and business! I will be sure to leave you positive feedback! ;)

Thanks,
Brian

Flash N Dash Performance

WOOHOO!!! Man... can't wait! Question: I've been reading through the thread, so this exhaust will be delivered from CA... correct?

Thanks,
Karl

kitsune713 - Karl, Yes sir you are correct! :) Get to you faster! ;) You will love this exhaust I promise! I also left you some positive feedback under your profile...if you would kindly do the same later on that would be great!

Thanks,
Brian

Flash N Dash Performance

Brian im waiting for some money to come in, damn paperwork, but if i were to order a 3' catback dual tip, and a friend were to order the same or a 2.5" shipped to teh same address, what woudl teh end cost be, could we get any additional money breaks?

gramadin - Yup! :) I will work you a deal out when you are ready! ;) I will save you both some money. Just let me know and I will take care of you!

Thanks,
Brian

Flash N Dash Performance

Does this exhaust sound similar to the stock one. I want something that is quiet (like stock) because I take clients out sometime. I have a stock turbo and a Turboxs piggy back ecu. Any thoughts on this.

it's quiet until you go WOT. then it sounds like a mean and nasty boxer :D

too much to read thru. does the 3in dp mate up to the stock 3rd cat?

here's some dyno proven numbers for you guys on the 3" twin tip, catted turboback. my car is a wrx AT with a vf34 and all supporting mods except the turboback until recently...

the difference? +21whp and +38lb-ft untuned. +31.9whp and +52.8lb-ft after tuning. pretty nice...

boosted - Yeah what RussB said...it is quiet....prolly one of the best sounding exhausts out there. It would be perfect for taking clients around in. :) Let me know if we can get one out your way!

RussB - WOW those are some impressive numbers there! I really appreciate an outside source providing some numbers to show just how great this exhaust system really is!

chxh8me - The 3in DP is 3in all the way...and the stock 3rd cat pipe is 2.5in so it won't fit...but Stromung has been tickering around with making parts that will fit stock pieces....I will check with them to see if they have made anything new like this. Or you can always get the whole exhaust! ;)

Thanks,
Brian

Flash N Dash Performance

boosted - Oh and you can place an order through me by sending funds through PayPal to autransam@earthlink.net and I will take care of the rest! ;)

Thanks,
Brian

Flash N Dash Performance

How much 3in down pipe with wastegate to 94510. I have heard of folks using this with stock third cat.

Double Helix - For just the 3in DP it would be $195 shipped! :) And if you have heard of people using it with the stock catpipe then that would answer chxh8me question! ;)

Let me know!

Thanks,
Brian

Flash N Dash Performance

i sent you a pm about my order

will98rs - Just replied to it bud! :) lol we are on the same page thinking alike.

Thanks,
Brian

Flash N Dash Performance

Do you still have 2.5" XP Catback systems for the 2003 WRX. If so what is the time to get one out to chicago also what finsih is the system (stainless - mild).

Thanks

mutant 9 - Yes I can still get them. They are not as pobular as the 3in Catbacks but if you want the 2.5in I can still get it. It would take a couple extra days because it is special order. But nothing too long at all. The 3in will fit on your stock car because it can taper down to 2.5in at the connecting flange. So if you would like one of those instead then let me know! I will give you pricing for both! ;)

2.5in XA Tip Catback - $535 shipped
3in XA Tip Catback - $585 shipped

And they are all Stainless Steel! :) Ah the good stuff!

Let me know!

Thanks,
Brian

Flash N Dash Performance

Brian,

I got the cat-back on Monday and installed it yesterday. All I can say is... I LOVE IT! The sound is so mean! Anyways, I'll PM you the response from UPS for furure reference.

Thanks!
Karl

kitsune713 - SWEET! :) I am glad that you love it so much! Thanks for posting too and I will check my PM's for that response. Let me know if I can ever do anything else for you!

Thanks,
Brian

Flash N Dash Performance

I want Stromung exhausts to be the first on everyones mind when they think of a great exhaust so I am pushing this to the top.... ;) Keep checking back for the latest in prices and sales. If you have any questions then feel free to ask...that is what I am here for.

Thank you to all that have placed order and now know the joy of owning a great exhaust! :)

Brian

Flash N Dash Performance

bump for a great vendor and an awesome exhaust.

RussB - Thanks for the bump bud! :) Let me know whenever you need anything else! ;)

Thanks,
Brian

Flash N Dash Performance

can i put a 2.25" cat eliminator on a 2005 rs? i already have a stromung catback. what type of gains would i expect? would there be more or less gains that a high flow cat? thanks. and quote shipped to 80027.

is this the same as a high flow track pipe?

rsracer2005 - First off Stromung doesn't make a cat eliminator pipe for your car that I am aware of...but they do have a High Flow Catpipe for your car that is 2.25in piping. This will increase HP by 4-7 depending on what you have done to your car already. This is not what they consider a track pipe because it still has a form of a cat in it. Just better flowing then stock.

The price on this piece is $345 shipped in the US.

EDIT - Now a Track Pipe from Stromung is available for $265 shipped.

Let me know if you have any other questions! :)

Thanks,
Brian

Flash N Dash Performance

P.S. Same message sent to your PM. ;)

sent payment through paypal for stromung track pipe and perrin pulley for 2.5 rs.

rsracer2005 - Got it! :) I will get this processed as soon as the eCheck clears and let you know when it ships out. I will keep you up to date on the whole deal. Thank you for your busienss and support!

Thanks,
Brian

Flash N Dash Performance

Sent payment for dual tip Stromung (RS)

Jay

pm sent re: mufflers.

Jyik40 - Got it! :) I will get this processed and let you know when I have a tracking number for you! Thank you for your business and support!

RexKAT - Working on it now! You will have a PM in a few! ;)

Thanks,
Brian

Flash N Dash Performance

Jyik40 - Oh and I left you some feedback under your Trader Rating... ;) Which is under your screen name on a post incase you don't know.

Thanks again!

Brian

Flash N Dash Performance

Do you have any axleback's with a dual tip that is all 3"? I have a Blitz Nur-Spec R cat back and I want an axleback that will quiet it down some. I'm not sure if it will bolt up but if it would work how much would it set me back includeing shipping to St. Louis MO?

the axleback portion that came with my turboback is full 3", so you should be able to get ahold of that.

MO REX - Yes you can get a 3in Axle Back for $465 shipped. :) It will quiet your car down a bit but you will still be able to tell a difference. Let me know if you would like to go ahead and order one.

You can place an order by sending funds through PayPal to autransam@earthlink.net and I will take care of the rest!

RussB - Thank you for helping out bud! :)

Thanks,
Brian

Flash N Dash Performance

Thanks for the replies guys.

Just how much do you think this axle back will quiet my exhaust down and do you know for sure that it will bolt up to the front section of my Nur-Spec catback? With the silencer in the Blitz I can handel the volume but without it's as loud as a mofo. I'm hopeing to buy something that is the same volume or a little louder than my Nur-Spec with the silencer and I want to get rid of the grapefruit shooter look. I'm not too worried about the volume at WOT, just at idle and when I'm cruiseing up to 85 mph (no droning). Also is the muffler black with stainless tips or is it all stainless in color?

Sorry to bombard you with these questions but I would hate to spend $465 and have an exhaust that is too loud for my taste. If your answers are what I'm looking for I will be ordering an axle back and gasket very soon.

Current exhaust mods.

STI upipe

TXS DP and cat pipe

Blitz Nur-Spec R catback

Thanks.

i had a 3" straight through magnaflow with a 4" tip catback custom made a year or so ago. that thing was freakin loud, i'd imagine it's about as loud as your nur-spec since it's very similar construction. The stromung is much quieter, even at WOT. it's even wife friendly ;) as for the looks, it is a full stainless muffler. looks pretty stock though, here's mine.
http://www.i-club.com/forums/attachment.php?attachmentid=28484

RussB - You are DA MAN on answering all these questions. :) You are right on top of things. Oh and nice pic there! :)

MO REX - Exactly what RussB was saying. It will be quieter then the NurSpec for sure but still loud enough to notice. And it is all Stainless and looks bad arss! ;) As far as for sure it will bolt up in theory it should since most catbacks use the same design flow but there has been no offical testing done. So you are at your own risk with that one. But I would think it would fit. Just want to be up front with you. Either way you will have a great exhaust and if it doesn't fit I will work with you to get you the other pipe that will work with it.

So just let me know what you would like to do!

Thanks,
Brian

Flash N Dash Performance

Thanks for the help RussB and thanks to Flash N Dash for being honest, PM sent.

I'm not good with the exhaust stuff. I have a 2000 LGT Wagon. Will any of these work? What do I need? I am not looking for noise at all but can accept some. My engine is completely stock.

What is the difference between cat back and axle back?

LEGACY
2.5in piping
Axle Back
Dual Tip - $435
Single Tip - $405
Intermediate Pipe (has resonator built in) - $210

Cat Back
Dual Tip - $645
Single Tip - $615

Thanks!

I have a 2000 LGT Wagon.

Do you have anything else for my car you can recommend?

Thanks!

Do you still have the 2.25" Single Tip axelback for the 2000 RS? Is it SS or Mild? i want stainless! sorry if it's posted in here somewhere but i just read the 1st and last pages, i didnt wanna read all 8... :)

MO REX - Yor are most welcome! I will be responding to your PM in a few minutes.

Flanders - So you have a 2000 Legacy Wagon correct? If so then any of the exhausts that you posted will fit your car. The difference in the exhausts, Catback vs. Axleback, is in the name. A catback consists of two parts...and Intermediate Pipe and a Rear Muffler Section....and it connects just behind the catylitic converter of your car. Hince Catback... And the Axle Back is one piece it is just the Rear Muffler section...going from the axle of your car back...hence Axleback. See the diff? The Catback will give you more HP but neither are real loud. The most popular is the Dual Tip because it looks stock and produces a nice sound but it is not real loud at all. Let me know if you have any other questions but this is what I would recommend for your car.

PoopRSkupe - Yes we sure do! It is like all of the Stromung exhausts...Stainless Steel. No more of that mild stuff! ;) And I understand about not wanting to read through all of these pages...it was up to 40 earlier this year and I had to start a new one! That is how much people love these exhausts though. Let me know if you are ready to get one or if you have any other questions!

Thanks,
Brian

Flash N Dash Performance

Yes i am ready and willing to buy! What is your current price for this peice, and what is your paypal adress? you can PM the info if you would like

Flanders - So you have a 2000 Legacy Wagon correct? If so then any of the exhausts that you posted will fit your car. The difference in the exhausts, Catback vs. Axleback, is in the name. A catback consists of two parts...and Intermediate Pipe and a Rear Muffler Section....and it connects just behind the catylitic converter of your car. Hince Catback... And the Axle Back is one piece it is just the Rear Muffler section...going from the axle of your car back...hence Axleback. See the diff? The Catback will give you more HP but neither are real loud. The most popular is the Dual Tip because it looks stock and produces a nice sound but it is not real loud at all. Let me know if you have any other questions but this is what I would recommend for your car.

Thanks,
Brian

Flash N Dash Performance

I am keeping the quoted material incase others in my situation are looking for similar info.

FYI: My tailpipe is hidden and bends downward behind the bumper and is single tip.

Are either bolt on or need special installation? This will pass Cal emissions? Does anyone know how long this should last?

Do you have anything regarding brakes or other mods for this vehicle?

Thanks for the quick results, very appreciated.

PoopRSkupe - Hey the current price is $405 shipped in the US. And the PayPal address is autransam@earthlink.net :) Please let me know if you have any other questions!

Flanders - There is no special requirements that I am aware of for a different pipe. All are built to fit the stock specs of the Subarus. You are not replacing any of the cats so you don't have any problems with emissions...only when you replace those do you have to worry about them passing emissions. I will get together a list of mods that I can think of for your car and email them to you. Sound good? :)

Thanks,
Brian

Flash N Dash Performance

$ sent, thanks.

MO REX - Got it! :) Order being processed...and feedback left for you! ;)

Thank you for your business and support!

Brian

Flash N Dash Performance

payment sent!

PoopRSkupe - Got it! :) Order being processed...and feedback left for you too! ;)

Thank you for your business and support!

Thanks,
Brian

Flash N Dash Performance

sup Brian... it's been a while since I've bumped your thread.. a guy in Hawaii "JT-STI" is looking for the "Best Turbo-Back Exhaust System" http://www.i-club.com/forums/showthread.php?t=77598 and I referred him to you... Take care of him like you took care of me and I'm sure you'll have ANOTHER satisfied customer!!!

Jon

iNfEk - Sweetness Jon! :) Thanks a ton bud and you know I will take care of him as I do everyone! ;)

Thanks,
Brian

Flash N Dash Performance

I just got the axel back and I am very happy with it. The pipes lined up good but the holes in the flanges didnt so I took it to a muffler shop and they focked up the blitz pipe so now I need a price on the front portion of a Strumung catback.

I must say this axel back really quieted my exhaust a lot (almost too much) but I think when I get rid of the Blitz pipe which has a 2 foot section of reasonator and replace it with the Stromung piece it will be perfect. Am I correct in thinking the Stromung pipe doesnt have a reasonator and do you know of anyone that has mounted a Stromung cat back to a TXS catpipe? My cat pipe has already been customized to fit the blitz and it now has a flange like the one on the Stromung axel back you just sent me.

If any of you people out there are thinking about purchaseing from Flash N Dash I would say go for it. Brian has been honest, very helpful, he also sells a great product and I would recommend them to anyone.

MO REX - Hey thank you for your kind words! :) I hate that it didn't work but I know you will be happy with the Stromung full Catback anyways because it does not have a resonator built into the Intermediate Pipe. Which by the way will be $180 shipped for the 3in Intermediate Pipe. ;) The Blitz Catback has that resonator built in because their exhaust is so loud that they needed a buffer to tone it done a bit and even then it is pretty loud!

I know I have had other customers that have had the TurboXS DP but I do not remember their comments on the fitment. The claim from TurboXS is that their catback adapter will fit any catback on the market...so I guess we will see. It should work based on what their claim is.

Let me know when you are ready to get that Intermediate Pipe!

Thanks,
Brian

Flash N Dash Performance

I will not be able to use the cat back adapter. TXS doesn't have a catted adapter and I dont want to go completely catless because of the smell and enviornmental issues. I will have to attempt to fit it to the catted mid pipe without cutting the new piece I will be buying from you. I dont have too much room because of the 02 sensor bung so I may have to have some cut off of the front and rear of the catted midpipe bla bla bla.

I will be contacting you to purchase the intermediate pipe within the next 2 weeks. I have kept myself in the habit of paying my credit card bill in full so once that is done I send you the $.

Edit: Does the Stromung intermediate pipe have a flex joint at the first flange? The reason I ask is because someone told me they thought it did. I just left some feedback on your trader rating.

Thanks

MO REX - Hey if you still have your factory catpipe but just modified then the Stromung was meant to fit upto the stock pieces nicely. But if it is modified then it should be a little work but nothing major I hope.

The Intermediate pipe does not have a flex joint. :)

Sounds good on the credit card thing...if more people did that then less would be in debt like crazy. You are a smart cookie! Just let me know when you are ready to go!

Thanks for the feedback too! :)

Brian

Flash N Dash Performance

SALE SALE SALE!!!! FOR THE MONTH OF NOVEMBER TAKE THE FOLLOWING DISCOUNTS OFF OF THE ALREADY GREAT PRICES ON ANY STROMUNG EXHAUST!! AXLE BACK, CAT BACK, AND EVEN TURBO BACK...WHAT EVER YOUR HEART DESIRES!!

AXLE BACK TAKE - $10 OFF
CAT BACK TAKE - $15 OFF
TURBO BACK TAKE - $20 OFF

SALE IS LIMITED SO HURRY HURRY HURRY!!

Let me know if you have any questions!

Thanks,
Brian

Flash N Dash Performance

MO REX - Hey if you still have your factory catpipe but just modified then the Stromung was meant to fit upto the stock pieces nicely.


So does that mean the Stromung intermediate pipe starts off at the stock size then goes to 3"? I was hopeing for something that was full 3" since I have a full 3" TBE right now. If you quoted me a price for an intermediate pipe that was meant to bolt up to the factory midpipe and there is a full 3" intermediate pipe made by Stromung is there a price difference?

(Current exhaust mods)

STI upipe

TXS DP/cat pipe (the cat pipe is modified)

Blitz Nur-spec R intermediate pipe (modified to bolt to Stromung axle back)

Full 3" Stromung dual tip axle back


(Future exhaust mod plan)

STI upipe

TXS DP/catpipe (modified cat pipe)

Full 3" Stromung cat back

Flash n Dash, you have a PM from me.

Brian, just an FYI... the intermediate pipe that came with my 3" turboback did in fact have a flex section. it's right after the flange conneting to the cat-pipe.

whats up man - sent my payment 2 weeks ago. where's my goods?

Hey everyone sorry for the delay we have been away for a show over the last 4 days. So everything will get back to normal now....sorry for the trouble. ;)

MO REX - If you tell me you need a full 3in Intermediate pipe then I will make sure you get it. Stromung does make two different ones...one that will fit the stock catpipe and one for a full 3in turbo back. So just make sure you tell me which you need when you order. They are the same price also.

BLegacy - Checking them now also and you will have an answer within a few minutes!

RussB - Cool looks like that added that for their turbo backs because they didn't have them before. Thanks for the insight bud!

PoopRSkupe - Your stuff got a little delayed because Stromung ended up closing last week to go to the SEMA show so that pushed everything back. I called them just now and got you a tracking number on your stuff and you will be seeing it this week! Sorry for the delay but SEMA shuts down a lot of places for that week. ;) I will PM you the tracking number.

Thanks,
Brian

Flash N Dash Performance

$ sent for a Full 3" Stromung intermediate pipe.

MO REX - Sweet! :) I will take care of this order tomorrow for you and let you know when I have a tracking number for you. Thank you for your business and support!!

OH AND BY THE WAY THE SALE IS STILL ON!!!!

Thanks,
Brian

Flash N Dash Performance

I have a couple questions

1)Is the full 3" intermediate pipe the same length as the one that is made to hook up to the OEM DP? If not is it longer or shorter and by how much?

2)Do you sell stainless 3" flanges and if so how much? When I modify my TXS catpipe, I would like to keep everything stainless.

Thanks

I think I found the SS flange I am looking for if you dont sell them. The flange I found has 7/16" diameter mounting holes spaced 4-3/16 a part (from center-to-center). Do you know if that is the right size? If not I can measure when I get the pipe.

Thanks

MO REX - Hey there! The pipe would be the same length as the one made to hook upto the OEM pipe. Not sure on the flange measurements. You would just have to measure when you get the piece. Glad that you found the flanges because I don't carry them individually. :) Let me know if you have any other questions!

Thanks,
Brian

Flash N Dash Performance

Are the WRX and STI cat back the same?

mutant 9 - They are the same price but when ordering you need to specify what your car is so we get the correct fitment. :)

Let me know if you have any other questions!

Thanks,
Brian

Flash N Dash Performance

Just to understand better, what is the diffrence fit wise between a WRX and STI. I thought they were the same fit?

Thanks

Hey Brian,

Awesome prices! Just wondering if you know if there is much horsepower diff. between the 2.5in. turboback w/cat and the 3in. version w/cat. I am sort of cautious about going with a catless system since I will be driven on the street. Do you know if one or the other is little bit safer when it comes time to go for emissions? Also I’m sort of confused as to how many cats I would have total on the exhaust if I chose either one of these systems, could you break it down for me?



Thanks,



Rob

Sent you PM

Brian,

Will the 3 inch down pipe work with the WRX stock midpipe? I saw in the thread one person said yes but you said no.

Thanks

mutant 9 - You are right no difference in the WRX and STi Catbacks....the 3in DP will not fit the stock because it is a full 3in pipe trying to connect to the 2.5in pipe. It will connect but there is a chance that you will not get a tight fit. No telling...I have had people say that they have got it to work fine and others say that they had to work it a little to get it to not leak. Hope this helps!

SubRob - Hey I just replied to your email with the same questions so you can check that for the answers! :) Let me know!

blue blurr - PM's are being answered as we speak!

Hope everyone had a great Thanksgiving and didn't get too stuffed!

Thanks,
Brian

Flash N Dash Performance

Brian,

Will the 2.5" catless down pipe connect to the stock midpipe with out problem on my 03 WRX?

I notice that there is no devorced waistgate on this peice nor is there a bellmouth for the waistgate. What effects does this have on performance and turbo responce?

Thanks again

mutant 9 - Stromung is not making the 2.5in DP anymore because everyone was wanting the 3in because it made more power. If you wanted one I could see if they would do a special order but it would take a little longer to get it. All of Stromung's 2.5in parts fit upto the stock pieces great. They had better torque numbers on the 2.5in DP then anything else but the 3in stuff made better HP numbers. :) Let me know what you think!

Thanks,
Brian

Flash N Dash Performance

Our pipe is similar to the Stromung, but there are some very important differences. Here's the description of our pipe:

"The Crucial Racing Systems downpipe is manufactured to the highest standards using 100% 304 stainless for the pipes AND flanges, ensuring perfect fitment. This 3” pipe will bolt to your stock catalytic converter. It features a divorced wastegate and the wastegate tube is extended to just next to the bottom of the main exhaust pipe to minimize turbulence in exhaust gas flow.

The pipes and flanges are coated with the highest quality metallic-ceramic thermal protective barrier available today (2000 F is its rating and at 2400 F the coating still retains its integrity) to keep under-hood temperatures noticeably lower and maintain higher exhaust gas velocity. Extreme care is taken during the coating application process to ensure that the coating is applied consistently and will never fail."

Without naming ANY other manufacturer, especially Stromung, DPs are often made with "stainless steel pipe" but the grade is not mentioned and the material used for the flanges frequently is not mentioned. That's why we offer a lifetime guarantee.

As far as the midpipe goes, we have one in development now. But any midpipe that bolts up to the stock DP will work.

Brian: Care to elaborate on this matter?

http://www.i-club.com/forums/attachment.php?attachmentid=32644

check this thread out please: http://www.i-club.com/forums/showthread.php?p=806869#post806869 it's in HIIC chapter (Hawaii)

not trying to cause trouble but just want to know if STROMUNG knows about a "similar" if not duplicate pipe out there that is just made out of another material and ceramic coated.

Jon

Would anyone mind posting pics on the type XA on their WRX? 04 if possible... thanks!

iNfEk - Hey bud sorry for the delay in response! I have been closed for the holidays and have just gotten back into town! :) I do not know a lot about this new company any their claims but I will pass it onto Stromung and see what they have to say. Stromung has been in business for a long time now and have always strived to protect the integrity of their products and service. I have talked to other companies about this coating process before and they said that trapping the heat inside the Downpipe was a bad idea. This came from TurboXS...and I have talked to others about this too and they all said that trapping the heat in the downpipe would not be very safe or reliable. I will pass this on to Stromung though and see what they will say.

Thanks,
Brian

Flash N Dash Performance

Would anyone mind posting pics on the type XA on their WRX? 04 if possible... thanks!

Some one has to have one............ . ...

traffic - You would think! ;) I will try and look up the customers of mine that have purchased an XA tip and see if they can get us some pictures. :)

Thanks,
Brian

Flash N Dash Performance

SALE SALE SALE!!!! FOR THE REST OF THE MONTH TILL THE END OF FEBUARY TAKE THE FOLLOWING DISCOUNTS OFF OF THE ALREADY GREAT PRICES ON ANY STROMUNG EXHAUST!! AXLE BACK, CAT BACK, AND EVEN TURBO BACK...WHAT EVER YOUR HEART DESIRES!!

AXLE BACK TAKE - $10 OFF
CAT BACK TAKE - $15 OFF
TURBO BACK TAKE - $20 OFF

Let me know if anyone has any questions!

Thanks,
Brian

Flash N Dash Performance

SALE IS STILL ON!!! Don't miss out on the deals!

Thanks,
Brian

Flash N Dash Performance

Hey Brian, could you check with Stromung and see if they make an exhaust for the Infiniti G35? i loved the sound of that exhaust on my wrx :(

Any pics of the dual tip or type xa on a wrx?

For an STi with a stock downpipe, do I need the 2.5" cat back, or will a 3" work?

Could ya pm me the price for a 3" midpipe(the one right before the axle-back) for the WRX shipped to Hawaii.

Any pics of the dual tip or type xa on a wrx?

RussB has a close up pic of his car with a dual tip here http://www.i-club.com/forums/showthread.php?t=61428&page=8.

for an 04 STi? (ie bolt on)

looking for a 3" Turbo Back with Cat and dual tip.

How much shipped to Hawaii zip code = 96814

Is the sale still on until end of feb?

Thanks

blue blurr - Here you go! :) This is all I have.

illogical - Since you are getting a catback you can go with the 3in Catback to give you the most HP gains! :)

kumaWRX - Sure thing I will PM you!

MO REX - Thanks for the help there!

Tiare - Yeah the sale is still on! I will check on the price to ship it 2nd Day Air to you on the island and let you know something tomorrow. OK?

blue blurr, go here for a pic of my exhaust. http://www.i-club.com/forums/showpost.php?p=727082&postcount=144

RussB - Thanks bud! :)

Ok, I want to order, do I just toss you a PayPal with what I want, or is there something I'm missing?

Hey man no rush, just checking around for pricing and heard good things about Stromung Exhaust System!

Thanks

hey RussB you got any sound clips of that?

hey RussB you got any sound clips of that?
nope. RussA in the SRIC area is now the proud owner of that exhaust, he may be able to help you out. sounds nice and tame at idle, and very aggressive but not over the top at WOT.

hey i have a '99 2.2L and looking for a stromung system...do the 2.5rs ones fit up to my exhaust?

I just sent Paypal payment for a XA Tip Axle Back for 98 & up IMPREZZA RS's. Please contact me to let me know you received it OK. Thanks.

illogical - Nope you got it. :) And I got your order and am taken care of it for you! ;)

svek - Not sure but I will double check with Stromung on Tues. and see what they have for you and let you know... Keep an eye out for my PM and posting on here.

bolohuu - Got it bud! :) And I emailed you a confirmation on it too. I will let you know when I have a tracking number for you!

Thanks,
Brian

Flash N Dash Performance

kumaWRX - You have a PM waiting for you! :) Let me know!

Tiare - You also have a PM waiting for you on your shipping question!

svek - So you have a 99 2.2L Impreza? Or is that the make of you car or what? We are checking into the fitment issues now because in 98 they made some changes so we want to make sure what will fit your particular car. Please confirm the make of it for me!

Thanks,
Brian

Flash N Dash Performance

PMed Back at ya!

Thanks

DO ITTTTTTTTT, Norris~!!!

Tiare - Got it! I look forward to doing business with you! Let me know when you are ready to go and if you have any more questions!

Thanks,
Brian

Flash N Dash Performance

luktang - Do you already have one of these exhausts? :) If not, you need to get one too!

Yeah! Luktang, do it man! the dual tip will look good on your car!!!

Question. I have a stromung 2.5 dp and mid pipe, will the 3 divorced dp connect to my mid pipe?

TRAXSTARZ - Shouldn't work because the 3in DP doesn't taper to the 2.5in to fit the midpipe. :(

do you offer a catless pipe for the my00 rs or just the high flo cat?

matt01_17 - Yes we offer both options...

High Flow Catpipe - $345 shipped
High Flow Trackpipe (no Cats) - $265 shipped

Let me know if you would like to get one sent out to you! :)

Thanks,
Brian

Flash N Dash Performance

RussB - Hey I checked with Stromung and they only make stuff for the Subaru, Audi, and BMW. So sorry bud but nothing yet for your car! :(

Thanks,
Brian

Flash N Dash Performance

What diameter pipe is on the hi-flow cat for the 2.5 rs?


Thanks
-Caleb

Brian,
I got an '02 WRX wagon w/Vishnu Stage 0. I want to more power but minimize loudness (although a dose of boxer-rumble would be great!). I want to minimize droning in the car when traveling around. Here's some questions:
1) what is the power difference between 2.5" and 3" turbo back exhaust?
2) will a 2.5" be more quiet (that you can notice)?
3) if I were to simply add the Stromung primary DP w/waste gate and add a Stromung Catback to the other stock exhaust components (ie third cat) would this make since to do and would noise be reduced and have a noticible power gain over just a catback? Could this be done with either the 2.5" and or 3"?

Thanks,
Scott
4

Brian,
Can you send me the Stromung Catback sound clip too?

I have to say, the 3" dual tip cat back sounds f*cking awesome on my '04 STi. Even without a down-pipe or up-pipe, the tone is very nice. I am 100% satisfied with this exhaust and I'd totally recommend it.

Jeff

could u pm me an OTD quote for a stromung dual tip 3" catback for wrx shipped to CA? thanks~

could u pm me an OTD quote for a stromung dual tip 3" catback for wrx shipped to CA? thanks~
from page 1
Cat-Back 3in.
Dual Tip - $645

yea but i was jw otd cause page 10 said 15 off and didnt know if it included sales tax, etc

probably no tax since they're not in CA ;)

shazaam - It is 2.25in piping.

SkyHunt_WRX - Hey if you were trying to increase power then you would want to stay with the 3in piping...going with the 2.5in is only good for increased torque. If you were going to replace the Primary DP and get a catback then it would only make sense to go all the way and get a full Turboback because that would be the most cost effective and ensure that everything match up properly because the stock pipe is 2.5in. So to get a full 3in would make more sense. The Stromung exhausts are known for being not loud but giving you more of the boxer rumble like you want. Either of the tips will be fine with the XA being the loudest then the Single Tip, and least noisy being the Dual Tip. So that is what I would recommend going with a 3in Dual Tip Turboback with either high flow catpipe or racepipe depending on what set up you want. Let me know if you have any other questions! :)

illogical - Thanks Jeff! :) Glad you are satisfied!

se0ul - Yeah the price is back to the normal price on the first page because the sale ended in Feb. And that price includes shipping and there is NO tax for CA peeps.

soundwave - Thanks for the help! ;)

Thanks,
Brian

Flash N Dash Performance

Thanks Brian for the reply and mpeg. Sounds great - quiet at idle with a healthy dose of bark when the throttle is ripped!

Is there noticably more droning in the cabin when on the highway with the full turbo back compared to the catback?

And based on your last replies - price is as stated on page one and includes shipping and CA residents are not taxed; correct? PayPal or call you direct to order?
Scott

SkyHunt_WRX - Scott there is not much added droning when on the highway...I have a Turboback with no cats in it at all and it is not like those that you can't even hear yourself think or talk in. When driving on the highway it is a little increase in sound but not much at all. And yes you are correct the prices on the first page I keep current and shipping is FREE and no tax for CA peeps! :) And to place an order send funds through PayPal to autransam@earthlink.net and let me know what all you want....ie. Stromung 3in Dual Tip Turboback w/highflow catpipe or Racepipe (no cats) and I will take care of the rest! ;)

Let me know if you have any more questions!

Thanks,
Brian

Flash N Dash Performance

SkyHunt_WRX - When you order the exhaust do yourself a favor and either order or pickup a set of Kartboy exhaust hangers (the regular/short length, same thing). You'll end up with something that looks like the attached picture (just taken from my STi).

illogical - Very sweet pick and great advice! :) Thanks a ton for posting!

Thanks,
Brian

Flash N Dash Performance

Brian - I just wanted to be sure the dual tip muffler listed for the Legacy at the very start of this thread is the old ('97-99) body style. Previously I've only seen the single tip listed for that body style, but I'm very interested in picking up a dual tip.

Thanks,
Pat Olsen
'97 Legacy 2.5GT sedan

PS - What would shipping to 96706 be? (An arm and a leg, I'm sure!)

Patrick Olsen - I will double check for you but I am pretty sure that we will have an exhaust that will fit your car. I will check on the shipping!

Thanks,
Brian

Flash N Dash Performance

yo brian... :D

This is Jon from Hawaii... I see that some of my hawaii peeps are contact you about a great exhaust...

Anyway... do you know if Stromung makes a rear section add-on that replaced their 2 or 1 tip exhaust with a straight pipe? or more free flow?

I abosolutely love this exhaust but I'd like to get a little bit more power when racing. but ues the dual tip that I bought from you every other time. ;)

Jon

hey, im seriously thinking about getting a 3in stromuing single tip TBE within the next couple of days and i was wondering if anyone could send me a clip of how sweet the stromung exhaust sounds like and possibly even a picture with the single tip from a distance. if anyone could provide those things for me, you're great. thanks.

btw, sorry if this was asked already but would the 3in TBE fit to the stock uppipe correctly? thanks again.

Patrick Olsen - I will double check for you but I am pretty sure that we will have an exhaust that will fit your car. I will check on the shipping!

Thanks,
Brian
Any luck yet, Brian?

Thanks,
Pat

iNfEk - The only thing that would be better for racing would be their XA tip it is lighter and has a more free flowing design and it is a bigger tip. :)

0 4 P S M W R X - Hey I have a clip of the Single tip for you and some pics so if you would like me to send them to you then just PM me with your email address and I will get them out to you! Also if you are getting a Turboback then it is not affected by your Uppipe that is in a totally different area. Other side of the turbo. So no worries on that problem! ;)

Patrick Olsen - Doing some test fitting to make sure! Will have answer very soon!

Thanks,
Brian

Flash N Dash Performance

hey, I have the stromung 2.5" downpipe, but was wondering if they make the 2.5 inch "3rd cat eliminator" with a high flow cat?
Craig

Suby1128 - Craig, Hey they did make one at one time but I am not sure if they do anymore. I will check with them and see and let you know!

Thanks,
Brian

Flash N Dash Performance

Suby1128 - Craig, Hey they did make one at one time but I am not sure if they do anymore. I will check with them and see and let you know!

Thanks,
Brian

Flash N Dash Performance

Thanks, if they don't is it possible for you to let me know of any other 2.5" pipes with a high flow cat? Right now I'm running the stock 2.25" cat to an STi 2.5" Catback, and would like a full 2.5" exhaust.
Thanks again,
Craig

hey, i sent you a payment on saturday i believe, and i just wanna make sure you got it and i was wondering if you shipped it out already. thanks.

Patrick Olsen - Hey it is confirmed that the ones that we have will fit your year model Legacy! :) Sorry it took so long but I wanted to be sure! Let me know when you are ready to order!

Suby1128 - Yes Stromung is still making the 3rd Cat Eliminator Pipe in 2.5in for $180 shipped.

0 4 P S M W R X - Yep I got it and it went out today! :) I will have a tracking number for you tomorrow and you should see it on Friday at the latest!

Thanks,
Brian

Flash N Dash Performance

Thanks! i hope it comes in soon!

Patrick Olsen - Hey it is confirmed that the ones that we have will fit your year model Legacy! :) Sorry it took so long but I wanted to be sure! Let me know when you are ready to order!

Thanks,
Brian

Flash N Dash Performance
Brian,

I'm ready to order now, how much will it be shipped to 96706?

Pat

Will a 2005 WRX pass smog with a 3rd cat eliminator?

0 4 P S M W R X - Should not be too long now! :) I emailed you the tracking numbers for your order!

Patrick Olsen - You just wanted the Dual Tip Rear Muffler right? That would be $485 shipped to HI 2nd Day Air! :) If you wanted the Dual Tip Catback then it would be $695 shipped. Let me know which one you want!

cavallino33 - These catless exhausts were not ment to pass any kind of smog tests. You must use your own caution to that regards. Let me know if I can help in any manner!

Thanks,
Brian

Flash N Dash Performance

Patrick Olsen - You just wanted the Dual Tip Rear Muffler right? That would be $485 shipped to HI 2nd Day Air! :) If you wanted the Dual Tip Catback then it would be $695 shipped. Let me know which one you want!

Yup, just the muffler section. Paypal $$$ will be on the way in just a few minutes.

Pat

Patrick Olsen - Sounds good! :) I will be on the look out for it and get your order processed right away!

Thanks,
Brian

Flash N Dash Performance

how much for a 3" downpipe w/ 3" midpipe and shipping to 96797? i need it to connect to my existing catback.

could you guys sell just the 3" stromung midpipe for a wrx? i need one one for a 3" dual tip stromung axleback.