Do I nead rear ajustable camber bolts?
Guest
Posts: n/a
Do I nead rear ajustable camber bolts?
I just lowered my car with hotchkis front and rear springs and KYB AGX ajustable shocks. The car is only about 1/2 lower than stock in the rear and about 1 1/2 lower in the front.
Am I going to need to buy rear ajustable camber bolts to assure my car can be aligned properly? I tried to get some H&Rs but they are backstocked.
Any help would be great.
Thanks,
Am I going to need to buy rear ajustable camber bolts to assure my car can be aligned properly? I tried to get some H&Rs but they are backstocked.
Any help would be great.
Thanks,
The factory spec for - camber is -1.5 in the rear and I would guess with a 1/2" drop it will be around -1.7 to -1.75. That is a guess since I was at -2 with a 1.2" drop. If you want factory settings you will need a camber bolt kit but Ive heard of people running around -1.7 with out any uneven tire wear as long as toe was at 0 but it is kind of high IMO. Also if you want more - camber in the front than in the rear to adress understeer you will definately need a bolt kit.
Thread
Thread Starter
Forum
Replies
Last Post
WRXTURBO
NorCal Classifieds
8
Dec 29, 2009 02:54 AM
firebert
Suspension, Handling, and Brakes
2
Oct 21, 2005 02:40 AM