Well, I've been parting out a 95 FWD auto L for a couple months. It's still a roller, but would need an aweful lot if you wanted to put it on the road. Still has the engine/tranny but many engine parts have been removed and rebuilding was never in mind when removing things. If you happened to have another similar car that's been crashed, you could start with this frame. There's front end dammage, but not difficult to pull out. Needs a drivers door and fender, entire interior and so on. It's 26.2 miles west of Boston. I'd consider selling the whole car or keep selling it off part by part.

PM me if you have any interest.

jack

 

Heater core is still in place, but the entire dash is removed. Driver fender is gone and driver door needs to be replaced. Again, if you had a crashed car with lots of components that would need to just transfer to a frame, this would work. (lots of work to do this, obviously)

jack

 

$300 for what's left and it's yours.

jack

 

Interior is completely gone.....including carpet, headliner, seats

jack

 

Heater is there.

Dash is in a box ready to ship.

Instrument cluster has no clear plastic cover and I've pulled the tach out to use in another car.

Like I said.....pretty much the frame. It still has 3 good doors, all good glass trunk. Hood's gone now.

jack

 

Sedan.

Front bumper beam bend down, pushed the radiator support (lower) towards the engine enough to brake the driver side fan bracket. Driver door is trashed, but no body dammage there to speak of.

jack