well i was running the bleeder u guys sent me, and when i first installed it, after a little while it ripped, so i cut the riped part (which is towards the T shape siide) and readpet it, it worked pretty good for awhile and today when i poped my hood i noticed it was ripped again, but this more a more severe rip, but the odd thing about this is, it rip on the same side everytime, so whats wrong? they said i installed it wrong the first time, but i dont think i did cause if i did then the other side owuld of ripped also. Could it be the engine is getting to hot? HELP PLZ

 

If you have a chance call the office and they will be able to help you out with this one, step by step. Unfortunately we close for the weekend in about 30 minutes If you don't get ahold of them in time call on moday after 10.

--Kim @ Vishnu

 

i'mn sorry i should clarify it was the hose that ripped not the pill sorry.

 

answer? please reply

 

Not sure if this is helpful or not but... if you take the bleeder out and look at the ends and ramps make sure that there are no rough edges to slice the hose when you put it on. Might b one reason it is ripping on that side.

 

i checked,and it looks fine. any other advice?

 

If you haven't already called Vishnu during their business hours as Kim has suggested, that's the best way to go. In the meantime, if you can take several decent pics from different angles of the vacuum hose and bleeder on the car, it might help us to see what you see. We will then have something to compare it with.

--
0==WW==0
"…axles of evil…" - george w. bush

 

k i'll post pics up tomorow thx for the advice