New Perrin Performance Lowering Springs..
#1
New Perrin Performance Lowering Springs..
We have just gotten a shipment of the newly released Perrin Performance lowering springs.
These springs have been built to custom specifications designed with the stock shocks and bumpstops. The springs are progressive with a 15%-50% stiffer ride depending upon load.
The quality of the ride from these springs is remarkable!
The drop rate is 1.9" front and 1.5" rear giving the car a nice level look front to rear.
These springs will fit all 02/03 Impreza's.
MSRP is $274.99
Our introductory special is $250 shipped.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
These springs have been built to custom specifications designed with the stock shocks and bumpstops. The springs are progressive with a 15%-50% stiffer ride depending upon load.
The quality of the ride from these springs is remarkable!
The drop rate is 1.9" front and 1.5" rear giving the car a nice level look front to rear.
These springs will fit all 02/03 Impreza's.
MSRP is $274.99
Our introductory special is $250 shipped.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
#3
question for ya...
sounds like a good price and I am interested in the springs but I was wondering if you had to have a caster/camber kit put on your car after you got lowering springs to help the tire wear? At least this was the case on my friends mustang gt.
Besides that I am considering ordering the springs.
any thoughts?
thanks,
zagwrx
Besides that I am considering ordering the springs.
any thoughts?
thanks,
zagwrx
#4
ZAGWRX - From testing the rear really should use camber bolts or similar as the camber is around -2 although on the test cars the tire wear did not seem too bad without the camber taken out.
We would be more than happy to throw in a set of Camber bolts with the springs for an additional $30.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
We would be more than happy to throw in a set of Camber bolts with the springs for an additional $30.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
#5
Here are some photos that were sent by our first customer with the Perrin Springs.
Before : Front 27.5inches
[b]Before : Rear 26.5inches
After : Front 25.5inches
After : Rear 25.5inches
Tommy
www.mpjperformance.com
Before : Front 27.5inches
[b]Before : Rear 26.5inches
After : Front 25.5inches
After : Rear 25.5inches
Tommy
www.mpjperformance.com
#6
Initial Review :
Thanks again Dan!!
Tommy
www.mpjperformance.com
Car is lower and have a much more even stance, ride is not bouncy, almost stock-ish comfort, but more responsive compared to stock. Car felt more stuck to the ground and much more aggresive feel during cornering. Now I just need better tires
Tommy
www.mpjperformance.com
Last edited by Speed Element; 08-03-2003 at 10:05 PM.
#7
2006 Mt Hammy Car Show Winner
iTrader: (11)
Join Date: Dec 2002
Location: Danville, CA
Posts: 2,730
Car Info: Black 03 WRX, White 04 E46 M3
The car in the pictures above is mine. So far i really like the springs. The springs are on stock struts and my only other suspension mods are a rear sway bar and front and rear strut bars. The ride feels just a little bit stiffer then stock until you get into a turn. Once in a turn the springs really stiffen up and feel great. I haven't been able to really push my car hard in a turn yet due to the fact that i am still on the RE92's and as everyone knows these tires suck. Also the drop is perfect. It gives the car a really aggressive look and gets rid of most of the fender gap.
#8
Thanks again Dan, glad you are enjoying the suspension.
Theres a few more sets left!!
Tommy
(510) 487 - 4447
www.mpjperformance.com
Theres a few more sets left!!
Tommy
(510) 487 - 4447
www.mpjperformance.com
#9
Registered User
iTrader: (2)
Join Date: Aug 2003
Location: The confines of my own mind.
Posts: 2,294
Car Info: 180sx super drift machine!
hey guys, was just wondering...ya'll are in Hayward right? would it be possible to get the springs put on there at your shop? my friend Curtis Chu sent me to you guys
#11
Ex-ricer - Sure come on by, any friend of Curtis is in need of a hook up
ASpec818 - There would have to be a whole lot of springs sold for us to hit that kind of price so I would doubt that is going to happen.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
ASpec818 - There would have to be a whole lot of springs sold for us to hit that kind of price so I would doubt that is going to happen.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
#12
Guest
Posts: n/a
Mike, I'm sorry to break up your thread, but I've sent you 2 emails on the wearabouts of my missing parts for my Perrin catch can and I haven't had a reply. You said you were sending them to me a week and a half ago. Where are they? I have this can and I'm waiting to put it on and I can't and now I'm getting frustrated.
#13
ReXoRaMa - They have been sent out (albeit late) and I have sent you the tracking number via PM. Sorry I have limited access to email as I am and have been on vacation from last Monday through till Friday of this week.
One of the guys in the shop was tasked to ship it immediatley so I will find out why it did not go upon my return to work on Tuesday.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
One of the guys in the shop was tasked to ship it immediatley so I will find out why it did not go upon my return to work on Tuesday.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
#15
Guest
Posts: n/a
Originally posted by MPJ Performance
ReXoRaMa - They have been sent out (albeit late) and I have sent you the tracking number via PM. Sorry I have limited access to email as I am and have been on vacation from last Monday through till Friday of this week.
One of the guys in the shop was tasked to ship it immediatley so I will find out why it did not go upon my return to work on Tuesday.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
ReXoRaMa - They have been sent out (albeit late) and I have sent you the tracking number via PM. Sorry I have limited access to email as I am and have been on vacation from last Monday through till Friday of this week.
One of the guys in the shop was tasked to ship it immediatley so I will find out why it did not go upon my return to work on Tuesday.
Mike
(510) 487-4447
www.mpjperformance.com
www.gb-motorsports.com
Thanks Mike.