ACT Clutches and Flywheels for RS, Legacy, WRX and STi
#1
Registered User
Thread Starter
iTrader: (7)
Join Date: Nov 2002
Location: Long Island, New York
Posts: 745
ACT Clutches and Flywheels for RS, Legacy, WRX and STi
Got a ton of ACT clutches and flywheels ready to go for your WRX, RS/Legacy and STi's.
First, for the old school guys (2.5 RS '98-'01 and Legacy 2.5 GT "97-05 non turbo):
Clutch:
The ACT Clutch for these cars has a pressure plate that is significantly stronger than stock (these hold up to 304 lb/feet). If you have an RS or Legacy with a turbo kit, this is the clutch to get. Pedal effort is a bit stiffer than stock, but since it is a sprung hub and organic disk, it is very easy to drive for daily use as well as drag or track day use. Includes alignment tool and throw out bearing and pilot busing. When we had our own Project RS (ran 12.82@118), this was the only clutch that would hold the power! Priced at $449 shipped in the 48 states.
Order the ACT Clutch for your RS/Legacy here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1170
Flywheel: ACT's new 1 piece chromoly flywheel is an awesome addition to your RS or Legacy. Weighs 13.9 lbs, so it is light enough to make a big difference, but not so light that it causes driveability issues or unanted misfire codes. For the NA guys, this will really wake the car up and reward you with better throttle response, and better pull throughout the rev range. The NA guys know that the RS and legacy sort of feels like its towing something as it gets into the upper rev ranges - this flywheel is a dramatic difference and is one of the few things NA guys can do to their cars that will actually net them a performance gain. Priced at $269.00 shipped!
Order the ACT Chromoly Flywheel for your RS/Legacy here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1330
ACT Clutch + Flywheel for RS/Legacy - combo it up and save even more! Street Clutch + Street Flywheel priced at $675.00 shipped in the 48 states! Combos can be ordered on our site here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1170
WRX (2002-2005): WRX guys who are making more than 300 all love the ACT clutch, as it holds the torque (up to 411 ft/lbs), and is a great clutch for daily driven cars that also see weekend autocross, track, or drag race use. Priced at $499.00 shipped in the 48 states. Includes alignment tool and throw out bearing and pilot busing
Order the ACT Street Clutch for your WRX here: http://www.z1auto.com/prodmore.asp?m...ine&prodid=563
ACT also has a 13.9 lb, 1 piece chromoly flywheel for the WRX as well - priced at $269 shipped in the 48 states! Order the WRX flywheel here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1331
ACT Clutch + Flywheel Combo Deal for the '02-'05 WRX: $729 shipped in the 48 states - orders can be placed on our site here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1331
STi (2004-2005) - STi guys, ACT has your clutch too! Using a full face, sprung hub, organic disk with a pressure plate that can hold up to 475 ft/lbs of torque. Includes alignment tool and throw out bearing and pilot busing. Priced at $599 shipped in the 48 states. Orders can be placed on our site here: http://www.z1auto.com/prodmore.asp?m...ine&prodid=563
We accept credit cards and Paypal directly off our site at the links above. Any questions, feel free to shoot us a PM, email, IM or call us!
Adam
Z1 Performance
www.z1auto.com
631-863-3820
z1sales@z1auto.com
AIM: z1auto
First, for the old school guys (2.5 RS '98-'01 and Legacy 2.5 GT "97-05 non turbo):
Clutch:
The ACT Clutch for these cars has a pressure plate that is significantly stronger than stock (these hold up to 304 lb/feet). If you have an RS or Legacy with a turbo kit, this is the clutch to get. Pedal effort is a bit stiffer than stock, but since it is a sprung hub and organic disk, it is very easy to drive for daily use as well as drag or track day use. Includes alignment tool and throw out bearing and pilot busing. When we had our own Project RS (ran 12.82@118), this was the only clutch that would hold the power! Priced at $449 shipped in the 48 states.
Order the ACT Clutch for your RS/Legacy here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1170
Flywheel: ACT's new 1 piece chromoly flywheel is an awesome addition to your RS or Legacy. Weighs 13.9 lbs, so it is light enough to make a big difference, but not so light that it causes driveability issues or unanted misfire codes. For the NA guys, this will really wake the car up and reward you with better throttle response, and better pull throughout the rev range. The NA guys know that the RS and legacy sort of feels like its towing something as it gets into the upper rev ranges - this flywheel is a dramatic difference and is one of the few things NA guys can do to their cars that will actually net them a performance gain. Priced at $269.00 shipped!
Order the ACT Chromoly Flywheel for your RS/Legacy here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1330
ACT Clutch + Flywheel for RS/Legacy - combo it up and save even more! Street Clutch + Street Flywheel priced at $675.00 shipped in the 48 states! Combos can be ordered on our site here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1170
WRX (2002-2005): WRX guys who are making more than 300 all love the ACT clutch, as it holds the torque (up to 411 ft/lbs), and is a great clutch for daily driven cars that also see weekend autocross, track, or drag race use. Priced at $499.00 shipped in the 48 states. Includes alignment tool and throw out bearing and pilot busing
Order the ACT Street Clutch for your WRX here: http://www.z1auto.com/prodmore.asp?m...ine&prodid=563
ACT also has a 13.9 lb, 1 piece chromoly flywheel for the WRX as well - priced at $269 shipped in the 48 states! Order the WRX flywheel here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1331
ACT Clutch + Flywheel Combo Deal for the '02-'05 WRX: $729 shipped in the 48 states - orders can be placed on our site here: http://www.z1auto.com/prodmore.asp?m...ne&prodid=1331
STi (2004-2005) - STi guys, ACT has your clutch too! Using a full face, sprung hub, organic disk with a pressure plate that can hold up to 475 ft/lbs of torque. Includes alignment tool and throw out bearing and pilot busing. Priced at $599 shipped in the 48 states. Orders can be placed on our site here: http://www.z1auto.com/prodmore.asp?m...ine&prodid=563
We accept credit cards and Paypal directly off our site at the links above. Any questions, feel free to shoot us a PM, email, IM or call us!
Adam
Z1 Performance
www.z1auto.com
631-863-3820
z1sales@z1auto.com
AIM: z1auto
Thread
Thread Starter
Forum
Replies
Last Post
RallySportDirect
Engine and Drivetrain
8
10-26-2009 02:43 PM
Speed Element
Engine and Drivetrain
0
12-06-2007 05:24 PM
Z1 Performance
Vendor Group Buys/Specials
1
03-26-2003 08:11 AM