FS:CAN:JDM V7 int manifold, JDM V7 TGV deletes, UR 1600cc inj, Perrin fuel rails,more
02-06-2010, 08:50 PM
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: Ontario
Posts: 174
Car Info: 02 wrx
FS:CAN:JDM V7 int manifold, JDM V7 TGV deletes, UR 1600cc inj, Perrin fuel rails,more
I have the following for sale. All prices do not include shipping. Paypal is available to confirmed/verified buyers only (at your expense). Everything here is perfectly functional.:
1) Perrin V2 fuel rails - SOLD!!
2) Genuine JDM STi Version 7 intake manifold. No issues at all. Great condition cosmetically. This one is for the cable throttle body setups. It is a direct replacement for stock silver cable throttle units.
Price: $140.00 SOLD!
3) Ultimate Racing 1600cc flow matched injectors - Again, great condition.
I had some cups designed and machined from aluminum to slip onto the injectors. These allow them to drop right in on stock top feed TGV's without any modification. The cups have O-rings to seal them against the TGV's One of the o-rings on the cups will need replacement or gluing. I will include these custom-machined cups for free with these injectors.
I am also including a resistor pack, which allows them to work on setups that do not have low impedance drivers, such as AEM's EMS.
Perfect for those running E85, or other high-po setups.
Brand new, these sell for $660.00.
Price:SOLD!
4) AEM 5 Bar Map Sensor - This was installed onto the car for 10 minutes literally just to confirm operation of another one. Has no miles on it. Will also include the pigtail:
Brand new, these sell for $150.00.
Price: $80.00 SOLD!
5) Genuine JDM STi Version 7 TGV deletes
Price: $140.00 Sold!
6) Subaru single scroll OEM exhaust manifold with heatshields
Not much explanation needed here..
Price: $45.00
7) 2002 WRX stock top mount intercooler - has a few bent fins, but nothing out of the ordinary. Including the plastic Y-pipe as well as elbows, and bracket:
Price: $45.00
8) Infiniti Q45 Throttle Body - I have 2 of these. One comes complete with TPS and pigtails. The other does not. I have a matching aluminum weld-on flange that I will include also for easy retrofitting to your setup:
Price for unit with TPS and pigtail):$70.00 SOLD!
Price for unit without TPS and pigtail):$45.00
9) Mann + Hummel Provent 200 a.k.a Lingenfelter Performance Engineering air oil separator - Including the mounting bracket also:
These sell for $189.00 new.
Price: SOLD!
If you have any questions, please feel free to send me a PM.
1) Perrin V2 fuel rails - SOLD!!
2) Genuine JDM STi Version 7 intake manifold. No issues at all. Great condition cosmetically. This one is for the cable throttle body setups. It is a direct replacement for stock silver cable throttle units.
Price: $140.00 SOLD!
3) Ultimate Racing 1600cc flow matched injectors - Again, great condition.
I had some cups designed and machined from aluminum to slip onto the injectors. These allow them to drop right in on stock top feed TGV's without any modification. The cups have O-rings to seal them against the TGV's One of the o-rings on the cups will need replacement or gluing. I will include these custom-machined cups for free with these injectors.
I am also including a resistor pack, which allows them to work on setups that do not have low impedance drivers, such as AEM's EMS.
Perfect for those running E85, or other high-po setups.
Brand new, these sell for $660.00.
Price:SOLD!
4) AEM 5 Bar Map Sensor - This was installed onto the car for 10 minutes literally just to confirm operation of another one. Has no miles on it. Will also include the pigtail:
Brand new, these sell for $150.00.
Price: $80.00 SOLD!
5) Genuine JDM STi Version 7 TGV deletes
Price: $140.00 Sold!
6) Subaru single scroll OEM exhaust manifold with heatshields
Not much explanation needed here..
Price: $45.00
7) 2002 WRX stock top mount intercooler - has a few bent fins, but nothing out of the ordinary. Including the plastic Y-pipe as well as elbows, and bracket:
Price: $45.00
8) Infiniti Q45 Throttle Body - I have 2 of these. One comes complete with TPS and pigtails. The other does not. I have a matching aluminum weld-on flange that I will include also for easy retrofitting to your setup:
Price for unit with TPS and pigtail):$70.00 SOLD!
Price for unit without TPS and pigtail):$45.00
9) Mann + Hummel Provent 200 a.k.a Lingenfelter Performance Engineering air oil separator - Including the mounting bracket also:
These sell for $189.00 new.
Price: SOLD!
If you have any questions, please feel free to send me a PM.
Last edited by jigga; 02-21-2010 at 09:27 AM.
02-07-2010, 05:53 PM
#2
Registered User
Thread Starter
Join Date: Nov 2002
Location: Ontario
Posts: 174
Car Info: 02 wrx
TGV deletes have been sold, pending payment..
Everything else is still up for grabs!
If you want a shipping quote to your zip code, please PM me, and I can obtain one for you.
Thanks
Everything else is still up for grabs!
If you want a shipping quote to your zip code, please PM me, and I can obtain one for you.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
iflycoach
NorCal Classifieds
41
03-24-2014 03:34 PM
VRT Gump
NorCal Classifieds
17
02-15-2008 05:04 PM
Renick Motorsports
Engine and Drivetrain
0
09-23-2006 11:29 PM
