ultimate curve machine.
 

Ok. I've switched directions again, well not really. I have come up with a list of parts that I think will make a good "curve car" . Minus a few parts. I just want to know what you guys think...

Engine

FP 20G
Invidia DP
Helix UP
Pink Injectors
Walbro 255
Blitz LM FMIC
Perrin Pulley
HKS Hi-power
Perrin rail
Vishnu xede
greddy catchcan
coolingmist WI


Suspension
Whiteline sways
Whiteline endlinks
Whiteline ALK
Cusco strut braces
Whiteline HD mounts
Wilwood 6 piston FB
Wilwood 4 piston RB
Tein springs
KYB AGX struts
Custom 8 point cage
Rota 17x8 boost
undecided on tires


Driveline
DSS lightweight driveshaft
ACT lightweight flywheel 13lbs


Just let me know what you think. I could really use some input. This car still has to be driveable. It is going to see some track time maybe even a few Auto X's. No dragstrip. Basicly I'm going to tune for about 300whp and try to make the thing a fun car to drive. Thanks in advance.

errrrrrrrrrrrrr
 

Fixed.

maybe you want to add a set of coilovers to that list. and you don't need any engine mods for a "curve car".

Suspension
Whiteline sways
Whiteline endlinks
Whiteline ALK
Cusco strut braces
Whiteline HD mounts
Wilwood 6 piston FB
Wilwood 4 piston RB
GC height adjustable springs or a true coil over (from what I've read Tein springs are junk)
Koni inserts
Custom 8 point cage
Rota 17x8 boost
undecided on tires

If your upgrading the springs and struts don't forget to upgrade the tops. Whatever you do don’t save $ on the tires. Tires are the most important IMO.

BTW, If you want a good alignment you will want to max camber in the front and run around .5 deg. less in the rear so you will need something to adjust rear camber.

Rear trailing links and latteral links help alot for cannon runs.