Sway Bars?
08-03-2010, 06:52 PM
#1
Registered User
Thread Starter
Join Date: Aug 2010
Location: New Jersey
Posts: 10
Car Info: 2006 Impreza 2.5i
Sway Bars?
Do any of you guys know any good brands for sway-bars? After looking at how tiny the one on my Impreza was I decided for a new one. Im leaning towards Eibach since those are the springs that are on mine but willing to listen to any suggestions! :]
08-03-2010, 07:00 PM
#2
I have a white line. i have had it for 7 years. It was the best / most noticeable improvement. Springs meh what ever I can get a deal on. THey will blow out stock struts eventually
I only have a rear sway bar. Only complaint is that it uses polyurithane bushings, they never wear out but they squeak when wet some times
I only have a rear sway bar. Only complaint is that it uses polyurithane bushings, they never wear out but they squeak when wet some times
08-03-2010, 07:32 PM
#3
Chicks dig me. April Fool's!
iTrader: (31)
Join Date: Apr 2006
Location: Fremont, CA
Posts: 10,989
Car Info: 1997 Impreza, 2014 BRZ
You could try an OEM WRX/STi RSB. The one that is 20mm. I don't think they are the ideal set-up, but it is a good intermediate bar to learn on. And you can probably find one pretty cheap. $40 maybe.
08-03-2010, 09:37 PM
#5
Chicks dig me. April Fool's!
iTrader: (31)
Join Date: Apr 2006
Location: Fremont, CA
Posts: 10,989
Car Info: 1997 Impreza, 2014 BRZ
I have a Whiteline and think it's awesome. And I don't think you can go wrong, but if you are on a budget, I think the used OEM 20mm is the best way to go. You can't go wrong. Cheap! When you are ready to swap it out, swap it out. I think the Whiteline RSB's are $170ish new... I'd say get the 20mm OEM first. When you want more out of a rear bar, then get a bigger one. Yup!
Last edited by darkonion; 08-03-2010 at 09:41 PM.
08-04-2010, 12:05 PM
#11
Chicks dig me. April Fool's!
iTrader: (31)
Join Date: Apr 2006
Location: Fremont, CA
Posts: 10,989
Car Info: 1997 Impreza, 2014 BRZ
Only other thing you should be aware of is that you should get aftermarket endlinks as well. If you decide to go 22/24mm ish or bigger, might want to consider getting aftermarket mounts as well. The stock mounts flex and give way around that threshold.
08-08-2010, 09:27 AM
#12
Registered User
Join Date: Jan 2010
Location: Mck, CA
Posts: 168
Car Info: 07 2.5i SE OBP
Thread
Thread Starter
Forum
Replies
Last Post
hayakunai
Suspension, Handling, and Brakes
3
10-10-2006 03:12 PM
wrxwhip
Wanted
6
03-03-2005 01:33 PM
