suspension idiot here
suspension idiot here
Ok when it comes to suspension everything sounds like japanese to me. I have an 04' wrx. I have new 17" rims with 225/45/17 tires. I think that my whell gap is excessive. I would like to drop the front an inch maybe a little more and the back maybe 3/4" or more i don't know. I have don't have alot of money left to mod due to the rims,tbe,and ecu reflash. I would like to retain some of the ride quality, I also know that i need front and rear sway bars. I will get those but i want the car a little lower first. I need some suggestions please. Thanks in advance.
VIP Member
iTrader: (1)
Joined: May 2003
Posts: 2,445
From: GST Motorsports - Rally Division
Car Info: dangerous with a wrench
It sounds like your primary beef is with the appearance of the car (citing the wheel gap). If that's the case, you'd definately want to get something like springs before upgrading your rear swaybar (the front will not need to be changed, unless you get a really wacky setup and are getting oversteer). There are plenty of springs around that will drop the car around an inch and should still retain the ride quality you've cited as an important factor.
Registered User
iTrader: (9)
Joined: Sep 2003
Posts: 599
From: Fremont, CA
Car Info: was 05 WRX Wagon
Perrin and Tein offer springs that lowers the car around 2" up front/ 1.5" in the rear. For a less aggressive drop, Eibach, Prodrive or SPT springs lowers the car around 1". You can still use your stock struts, depending on how many miles you have on them already. The more aggressive drop springs will wear out your struts at a faster rate.
Soren
Soren
Thread
Thread Starter
Forum
Replies
Last Post
SnoHumper
Engine/Power - EJ20T (pre-2006 WRX and JDM)
2
Jul 13, 2003 03:23 PM
Steve Tack
Engine/Power - EJ20T (pre-2006 WRX and JDM)
6
May 10, 2003 12:29 PM



