Nice BOOTIE shot!!

 

Here's mine with USDM wagon pinks. Still some gap in the front. Dont really have one to show off the back. I was running 225's on 17's with two fatties in the back plus a ton of snowboard gear and never rubbed.

Another tip if you want to run sedan springs is to get the RCE lowering camber plates. They drop the front about 3/8 inch which evens out the drop.

I would strongly recommend the STi wagon springs. Very comfortable, and they were great at auto-x.

You would have to get 04+ rear strut tops and do the "washer mod" to get them to fit properly. Do a search on "washer mod" Turn in concepts has a fix that solves the problem.

Hope that helps.
Dan

 

Here a couple of my wagon, JDM STi Pinks Koni Inserts

 

the jdm/usdm springs don't look like they have much drop to them...the crucial drop looks a lot nicer but isn't the drop on those a little to much? looks like you'd scrape the curb or something

 

They dont look good when the car sits lower in the rear just get some crucial springs or eibach

 

I've got JDM Sti pinks and RCE camber plates on the way. So if you wait a couple weeks I can show you that drop.

Sounds like you'd be happy with the crucials. Good spring rate = performance and good drop = aesthetics.

Here is a link to their springs. On the page there is a link to more pictures, and there is a couple wagons on there.

http://www.crucialracing.com/products/springs.php

Like I said earlier you would have to get 04 strut tops and do the "washer mod." Here's a link for T.I.C. solution:

http://turninconcepts10.chainreactio...b3e2d0829624ce

 

http://www.clubwrx.net/forums/showthread.php?t=156659