Steering rack bushings for the 2006 Impreza
Thread Starter
Registered User
iTrader: (9)
Joined: Oct 2005
Posts: 3,312
From: San Jose, CA
Car Info: 2011 WRX hatch gray
Steering rack bushings for the 2006 Impreza
How does the 2006 WRX steering bushings compare to the other years?
Has the "steering slop" been reduced by the factory in the new models?
Any one done a steering bushing swap in an 06? (can seem to find anybody saying which bushings fit)
Has the "steering slop" been reduced by the factory in the new models?
Any one done a steering bushing swap in an 06? (can seem to find anybody saying which bushings fit)
Registered User
iTrader: (1)
Joined: Mar 2003
Posts: 106
From: Vancouver, WA
Car Info: Was06STi,now01Forester
Actually, the redesign on the 05/06 sti steering rack is quite good. Stock a lot of the slop is gone. I have installed the whiteline 05/06 sti steering rack bushings in mine and it did reduce the little slop it had. I would have to say it was worth it. The install was a bit of a pain, but I did it before they started sending out the tool for the driver side bushings with the kit. Should be pretty easy now. Hope that helps
Registered User
iTrader: (3)
Joined: Nov 2004
Posts: 1,047
From: Green Mountain Top Above A Green Forest
Car Info: 2005 WRX STI
Originally Posted by wrxwgn03
Actually, the redesign on the 05/06 sti steering rack is quite good. Stock a lot of the slop is gone. I have installed the whiteline 05/06 sti steering rack bushings in mine and it did reduce the little slop it had. I would have to say it was worth it. The install was a bit of a pain, but I did it before they started sending out the tool for the driver side bushings with the kit. Should be pretty easy now. Hope that helps
Thanks
E
Registered User
iTrader: (1)
Joined: Dec 2005
Posts: 287
From: South San Francisco
Car Info: '09 MX-5, '09 IS-F
I DLed a video of somebody doing the install. It doesn't seem to difficult. You have to take off a plastic cover, the jacking point, the 'stiffening bar' underneath the car, take off the two brackets holding the steering rack in place, remove the bushings and reverse the process.
It took him about 20 minutes, although I'm sure that wasn't his first time.
It took him about 20 minutes, although I'm sure that wasn't his first time.
Registered User
iTrader: (1)
Joined: Dec 2005
Posts: 287
From: South San Francisco
Car Info: '09 MX-5, '09 IS-F
Hi, found this posted on NASIOC. It's to the same vid
http://wrx.dicknogs.net/multimedia/Bushings_wmv.wmv
http://wrx.dicknogs.net/multimedia/Bushings_wmv.wmv
Registered User
iTrader: (3)
Joined: Nov 2004
Posts: 1,047
From: Green Mountain Top Above A Green Forest
Car Info: 2005 WRX STI
Originally Posted by WillisW555
Hi, found this posted on NASIOC. It's to the same vid
http://wrx.dicknogs.net/multimedia/Bushings_wmv.wmv
http://wrx.dicknogs.net/multimedia/Bushings_wmv.wmv
E
Thread
Thread Starter
Forum
Replies
Last Post
chochocho
NorCal Classifieds
12
Nov 18, 2014 09:17 PM
only1NCE
NorCal Classifieds
10
May 29, 2012 05:49 PM
DJ Catchem
Suspension, Handling, and Brakes
12
Jun 6, 2004 06:41 PM
Mach5WRX
Suspension, Handling, and Brakes
34
Feb 19, 2004 06:27 AM




