Jic Coilover front camber plates

Reply Subscribe

Thread Tools

Search this Thread

Jul 27, 2004 | 08:19 AM

SillyAssKilby

Thread Starter

Registered User

Joined: Nov 2002

Posts: 36

From: Baltimore, Md.

Car Info: 2002 Black WRX

Jic Coilover front camber plates

Could someone please post a picture of the front camber plates installed correctly. I have read several threads about this topic, but a picture is worth a thousand words. Thanks. Kilby

Jul 27, 2004 | 10:39 AM

platypus

VIP Member

iTrader: (1)

Joined: May 2003

Posts: 2,445

From: GST Motorsports - Rally Division

Car Info: dangerous with a wrench

how hard can it be to install camber plates?

Jul 27, 2004 | 11:01 AM

SillyAssKilby

Thread Starter

Registered User

Joined: Nov 2002

Posts: 36

From: Baltimore, Md.

Car Info: 2002 Black WRX

well A$$
its not hard to install but the guy that i bought them from had taken the coilovers apart to clean them up. I had to unscrew the bottom pieces and reverse them. he just kind of thru the stuff back together. just want to make sure they are right. thanks for the help.

Jul 27, 2004 | 05:28 PM

platypus

VIP Member

iTrader: (1)

Joined: May 2003

Posts: 2,445

From: GST Motorsports - Rally Division

Car Info: dangerous with a wrench

hey, any time mate!

Jul 28, 2004 | 02:48 PM

dynamicprojeKtz

Registered User

iTrader: (23)

Joined: May 2004

Posts: 2,370

From: Livermore, Ca

Car Info: WRB STi Hatch, JSW Diesel

i need this too. this would help me a lot. also got a noob question, but correct me if im wrong. the 2 middle perches adjusts the spring rate and the 3rd perch is to adjust the car height? if the 3rd perch is to adjust the car height...how does it work? if its not, then what is the 3rd perch for? someone please help me. thanks.

Jul 28, 2004 | 03:27 PM

SillyAssKilby

Thread Starter

Registered User

Joined: Nov 2002

Posts: 36

From: Baltimore, Md.

Car Info: 2002 Black WRX

try and make this simple

The third perch will screw down agianst the collar at the bottom of the coilover. After you loosen the bottom collar then the whole bottom piece will move and allow you to adjust the height of the coilover. check out this thread: http://forums.nasioc.com/forums/show...ht=calling+jic

it is long but has a lot of good info.
Kilby