installing eibachs?
Thread Starter
Registered User
iTrader: (1)
Joined: Apr 2003
Posts: 367
From: So. San Francisco
Car Info: 2003 WRX sonic yellow
installing eibachs?
i am thinking about installing a set of eibach springs myself...and my friend told me i will need to buy new cambers...is that really needed? and yea...i couldnt find any instructions on installing...any help on those? thanks
Registered User
iTrader: (12)
Joined: Nov 2002
Posts: 18,369
From: Reno, NV
Car Info: 1993/2000/2001 GF4 mostly red
Go to www.scoobymods.com for install instructions. No, you don't *need* camber bolts, but they are useful. Just get an alignment after installing them and you should be ok.
Last edited by Kevin M; Aug 8, 2003 at 10:45 PM.
Registered User
iTrader: (12)
Joined: Nov 2002
Posts: 18,369
From: Reno, NV
Car Info: 1993/2000/2001 GF4 mostly red
The only difference between installing assembled struts and just springs is swapping the springs onto your stock struts. Once you have them out of the car, you can unbolt the tophat, swap springs, and (much easier with an extra set of hands than with spring compressors) bolt the tophats back on. Then reinstall per the guide on scoobymods. Just be careful to properly align the springs and tophats with teh strut.
Thread
Thread Starter
Forum
Replies
Last Post