help with rear strut tower bar

Reply Subscribe

Thread Tools

Search this Thread

Jan 23, 2003 | 05:02 PM

shinma

Guest

Posts: n/a

help with rear strut tower bar

just bought the cusco os rear strut tower bar, only problem is that i don't know how to take out the top section of the rear seat. can anyone tell me a site that shows me how, or help me out here?

Jan 23, 2003 | 05:37 PM

Sundance45

Guest

Posts: n/a

Help with rear strut bar

Hey, there are three 12mm bolds at the bottom of seat(top section of seat) remove these bolts and push seat upward and it then can be removed.

Jan 23, 2003 | 06:39 PM

Peaty

Registered User

iTrader: (2)

Joined: Nov 2002

Posts: 1,644

From: Lawrence, Kansas

Car Info: 19' Impreza Sport Manual / 99 Miata / 13' OB

http://www.scoobymods.com/forums/sho...=&threadid=222

Jan 23, 2003 | 08:08 PM

Dave99

Registered User

Joined: Nov 2002

Posts: 37

Car Info: '02 WRX sedan

Once you've removed the three bolts, open the pass through and lift the seat back from the top of the pass through. THere is a thick wire that is captivated by a few tight slots spaced across the back. It won't take much force, but you might have to lift the seat back a certain way to pull it off the profiled centre slot.

It's pretty easy once you realize there are only three bolts to undo!

Dave.

Jan 27, 2003 | 02:22 PM

iceNine

Guest

Posts: n/a

The seat is really easy to take out and put back and it is pretty light to lift too but if you are by yourself be carful taking it out and in through the doors. I put a scratch on the body behind the rear door with the one of the lower metal brackets when I was putting it back in.