---

 

get a set of cusco sway bars with aftermarket end links it will really get rid of the under steer

 

---

 

i have Perrin end links, and have been happy with them in the rear. my fronts are Noltecs, and i have't had any problems with them either. the Helix ones that Gruppe-S sells should be good as well, Helix makes excellent quality products. i would think that front and rear end links by any of those three manufacturers (Perrin only makes rears) would be just fine.

 

Generally speaking, all sway bars and endlinks are the same. Sway bars need be judged only by the size they are marketed as. Endlinks differ only in bushing type, either urethane or spherical bearing. I personally would recommend the urethane type. As for sway bars, sizing is up to you, but choosing well depends on a lot of factors, including your skill, experience with cars that can oversteer, how hard you drive, etc. My personal setup is an STi 20mm rear bar with Whiteline KLC26 endlinks. Matched with my Prodrive struts and springs, the car pushes slightly when on the power, and comes around just a little when I lift, but not enough to spin me.