Front end link bent?
03-20-2005, 07:41 AM
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: NY/NJ
Posts: 47
Car Info: 2004 WRX
Front end link bent?
Can anyone help confirm that my front endlink should not look like this. It's on a 2004 STI. It's not a great picture - I didn't reduce the resolution until after this pic but this was still the best one. Thanks!
03-23-2005, 05:54 PM
#4
Guest
Posts: n/a
If one looks bent and the other is straight, I had that problem. Endlinks move around...I eventually got perrin endlinks to go with my sway bars and you can tell a difference.
A better picture would help..if that's a digi cam select "macro mode" the one with the flower type thing.
A better picture would help..if that's a digi cam select "macro mode" the one with the flower type thing.
03-24-2005, 12:16 AM
#5
VIP Member
Join Date: Nov 2004
Location: Japan, where the term "JDM" doesn't exist
Posts: 270
Car Info: '94 WRX, '97 Forester S/Tb, '95 WRX-RA
Yeah, a better pic would definitely help, but it looks pretty normal from the pic you have already provided. One thing you can do is feel the connecting shaft through the bootie of the endlink. If that feels bent at any angle, then it probably is bent and should be replaced. If it feels straight, then the link is fine, moving at the joint like it should.
03-24-2005, 04:37 AM
#6
Registered User
Thread Starter
Join Date: Apr 2003
Location: NY/NJ
Posts: 47
Car Info: 2004 WRX
Thanks for the help guys. I'll try to get a better picture this weekend. Might not be until Sunday as it looks like I'm going to the NY Auto Show on Saturday! And now I get to go out and play in some fresh snow here in NY!! Woohoo!
Thread
Thread Starter
Forum
Replies
Last Post
con10der_8
NorCal Classifieds
2
07-26-2010 01:23 PM
Subadubaru
Interior, Exterior & Lighting
10
05-03-2009 07:03 AM