Check out our new EQT Coilovers!

This was the final prototype set installed on a 2012 STI. After dialing in the spring rates, we ended up with a slightly firm, yet very smooth and comfortable ride that is suitable for everything from daily driving to moderate track work. The car stays completely flat and planted through corners, yet offers enough give to soak up even major bumps. This is due to the high quality damper design which offers a softer profile for high frequency travel such as bumps and sharp edges on the road, but firms up for low frequency such as turn in compression. The dampers are single adjustable in 24 increments which allows you to dial them in to your liking. The ride height and pre-load are also independently adjustable. We have our recommended spring rates, but also offer custom options upon request.

These are currently available for all 2002-2015 WRX/STI, and all FR-S and BRZ models!

Prior to this final prototype set on the STI, we have been doing extensive testing on these coilovers in our shop project BRZ. Our car has been put through many track days as we dialed in the best spring rates, ride heights, and tested reliability. After all the hell we put them through, everything is still in tip top shape!

Some features:

- 24 levels of adjustability

- Mono-tube shock design

- JIS G3445-STKM13C (DIN2393-ST44-2) carbon steel 52mm diameter seamless tube.

- 44mm linear characteristic internal piston.

- Lower height adjustable collar, preventing the need to adjust the spring perch, offering the maximum travel.

- Cold-bent springs made from high strength SAE9252 steel.

- Properly designed lower bracket for brake line & ABS line locations.


Standard pricing is $1495!

10-14 sets will be $1295.
15+ sets will drop it down to $1195!


Current List:
1. Derrick Antes
2. Ryan Nicholas
3. Patrick Garrett

Thanks
-- Ed