I have a entire 03’ WRX sedan motor and driveline for sale with 800 miles on it. The car is an insurance write-off due to extensive body damage but the motor and drive line are in perfect condition. The car runs great and can be test driven (short distance as not insured or registered) and all tests can be run on the motor. We are talking about 800 miles here, so the motor is not even broken in!

Here is what you get:

- Entire motor from the motor mounts up (i.e. engine, alternator, full intake system, intercooler, etc.) Does not include the motor cross member.
- 5 Speed manual transmission/clutch with complete shift linkage and clutch slave cylinder
- Main drive shaft
- ECU with harness for all the engine functions
- Entire AC system
- Radiator and hoses (not the electric fans)
- Complete exhaust system, tip to tail

Basically all the parts you will need to drop into your project Subaru and make it a WRX for a fraction of the cost. And have I mentioned 800 miles on these components!

I am located in Colorado so it would probably make more sense to be in this area but I suppose I could ship if needed (your cost).

Price: $6000 for all , $1000 deposit up front at time of sale. You are more than welcome to contact me directly at fin@bomberonline.com and ask any questions you have on this. Serious offers will be considered.

Below are some pictures on the car and engine area. Please do not respond about any other parts available other than what I listed.

Fin Doyle
Silverthorne, Colorado

 

Another shot:

 

It currently has a salvage title.

$6000 is for items listed in the above (first) thread.

 

Well, I can supply you with the ring and pinion (no extra charge) from the rear-end but I need the casing for another project. All you would need is another case, then put these in and you have the drive ratio that will match the tranny front diff.

Hope this makes sence.

Fin

 

Hello WRXSTIle,

If you go to the link below you will now see I have decided to part out the drivetrain.


https://www.i-club.com/forums/showth...threadid=24380

I have everthing you woul dneed for this swap so let me know.

Fin

 

Yep, using the body so no trunk lid.

Fin

 

How much for the ecu only the ecu no harness