Interior Amp under seat
Thread Starter
Registered User
Joined: Nov 2002
Posts: 145
From: Perrin Race DP Perrin Up-pipe Blitz Nur-spec CB Blitz LM intake TXS UTEC GFB BOV
Interior Amp under seat
Which interior amps that you know of will fit easily under the passenger seat? I am looking for something in the 40-50watts RMS by four. Thanks.
Guest
Posts: n/a
The under-seat area in these cars is huge, right now I have TWO (small) amps under the driver's seat and you can still see no wiring or clues that they're there through the windows.
I don't recall the dimensions you need to stick to off-hand, but you can just break out a measuring tape and measure what will fit. There are always dimensions listed when buying online. Go more for square-ish and less for elongated.
I don't recall the dimensions you need to stick to off-hand, but you can just break out a measuring tape and measure what will fit. There are always dimensions listed when buying online. Go more for square-ish and less for elongated.
Registered User
iTrader: (14)
Joined: Nov 2001
Posts: 14,221
From: Peoples Republik of Kalifornia
Car Info: 05 H2 SUT, 45 GPW, 10 Murano, 13 Boss 302
I fit this bad boy under the driver's seat. If it fits, most any 4 channel amp will fit.
By the way it's a Helix 5 channel (60x4 + 250x1)
By the way it's a Helix 5 channel (60x4 + 250x1)
Registered User
Joined: Nov 2002
Posts: 378
From: who wants to know?
Originally posted by wrXratd
I fit this bad boy under the driver's seat. If it fits, most any 4 channel amp will fit.
By the way it's a Helix 5 channel (60x4 + 250x1)
I fit this bad boy under the driver's seat. If it fits, most any 4 channel amp will fit.
By the way it's a Helix 5 channel (60x4 + 250x1)
Thread Starter
Registered User
Joined: Nov 2002
Posts: 145
From: Perrin Race DP Perrin Up-pipe Blitz Nur-spec CB Blitz LM intake TXS UTEC GFB BOV
Thanks for the help, curently I'm deciding between the....
Brand Model Power Dimensions
Height Width Length
Alpine MRP-F200 40x4RMS 2 5/16" 11 13/16" 10"
Kenwood KAC-749 40x4RMS 2 1/4" 13" 11 3/4"
RF Punch 300X 37.5x4RMS 2 7/16" 13 3/8" 9 7/8"
So these should all fit easily? Well if that's the case then it's time for speakers, what should I go with? I'm thinking components in front.
Brand Model Power Dimensions
Height Width Length
Alpine MRP-F200 40x4RMS 2 5/16" 11 13/16" 10"
Kenwood KAC-749 40x4RMS 2 1/4" 13" 11 3/4"
RF Punch 300X 37.5x4RMS 2 7/16" 13 3/8" 9 7/8"
So these should all fit easily? Well if that's the case then it's time for speakers, what should I go with? I'm thinking components in front.
Guest
Posts: n/a
Originally posted by Dick Fitzwell
that's a pretty nice amp, how much does it run if you don't mind me asking?
that's a pretty nice amp, how much does it run if you don't mind me asking?
It is going for 659.00
Thread Starter
Registered User
Joined: Nov 2002
Posts: 145
From: Perrin Race DP Perrin Up-pipe Blitz Nur-spec CB Blitz LM intake TXS UTEC GFB BOV
Originally posted by DanMan
Whatever you do, stay far far away from RF products. The excellent products they made years ago are just a memory.
Dan
Whatever you do, stay far far away from RF products. The excellent products they made years ago are just a memory.
Dan
Registered User
Joined: Nov 2002
Posts: 378
From: who wants to know?
02GatorWRX--thx for the link, that is a really nice amp!
i also agree with DanMan on the rockford stuff, i am currently running all rockford stuff, BUT it is all the older stuff and i just can't speak to highly of the new.
1quikrex-you should definetly go with components, how much do you have as far as a budget goes? you should really replace all door speakers at once especially if you plan on running the rear speakers off an amp as the stock speakers don't last long off amp power i know from experience
i also agree with DanMan on the rockford stuff, i am currently running all rockford stuff, BUT it is all the older stuff and i just can't speak to highly of the new.
1quikrex-you should definetly go with components, how much do you have as far as a budget goes? you should really replace all door speakers at once especially if you plan on running the rear speakers off an amp as the stock speakers don't last long off amp power i know from experience
Thread Starter
Registered User
Joined: Nov 2002
Posts: 145
From: Perrin Race DP Perrin Up-pipe Blitz Nur-spec CB Blitz LM intake TXS UTEC GFB BOV
Re: mine fit
Originally posted by cnstman
rockford fosgate 600 a 4 fits great plenty o' room under there!
cnstman
rockford fosgate 600 a 4 fits great plenty o' room under there!
cnstman
Guest
Posts: n/a
I just installed a Kenwood KAC-729S amp under my seat..... it fits perfect and sounds great. i just velcroed it to the carpet. i have an alpine deck, rockford 6 1/2's up front, kenwood 6x9's in the back. Best of all, it only cost me 220 for the amp and speakers. i also rewired my whole car w/ stinger wires. this guy that i got the stuff from is pretty cool...... its all stuff from his old shop that he's trying to get rid of.
Thread
Thread Starter
Forum
Replies
Last Post
WRXncrew
Interior, Exterior and Lighting
14
May 7, 2014 12:41 PM
SparkySti
Used Aftermarket Car Parts For Sale
1
Jul 6, 2010 10:56 PM
outcast
Used Aftermarket Car Parts For Sale
1
Jul 10, 2007 01:50 PM
omygata
Interior, Exterior & Lighting
0
Jan 20, 2006 07:51 PM
