Help with wiring! please

Reply Subscribe

Thread Tools

Search this Thread

03-28-2003, 08:51 PM

Detroit wagon

Registered User

Thread Starter

Join Date: Dec 2002

Posts: 11

Car Info: 2002 WRX wagon WRB

Help with wiring! please

So I have my defi gauges mounted and everything ready to go. Problem is, I have major suck when it comes to wiring. The defi control unit has 4 leads; +power, ignition, ground and illumination.
I plan on mounting the control unit where the ashtray is so I can use any wires in the center console, preferably the radio harness.

Could someone please just tell me what color wires to splice into for each of these leads? I'm goin' crazy here.

Thanks

03-29-2003, 07:28 AM

sparks

Guest

Posts: n/a

On the clock plug

Pin 1 (LR) Constant hot wire
Pin 4 (YG) Switched power
Pin 3 (PL) Lighting
Pin 2 (B) Ground

1st letter is the main color and the 2nd is the making line.

L-Blue
R-Red
Y-Yellow
G-Green
P-Pink
B-Black

As listed in the 2002 wiring system shop manual

Double check with a 12 volt test light

Shaun

03-30-2003, 06:16 AM

Detroit wagon

Registered User

Thread Starter

Join Date: Dec 2002

Posts: 11

Car Info: 2002 WRX wagon WRB

THANKS!!!

05-02-2003, 08:26 AM

Detroit wagon

Registered User

Thread Starter

Join Date: Dec 2002

Posts: 11

Car Info: 2002 WRX wagon WRB

Well this didn't work for me. The wires all have good connections (I soldered everything) and I tested each circuit. Did I read there was something funny about the way Subaru handles the ignition switched power supply? Anybody have any additional input? I feel silly having this gauges that do nothing.

John

05-05-2003, 06:02 AM

Detroit wagon

Registered User

Thread Starter

Join Date: Dec 2002

Posts: 11

Car Info: 2002 WRX wagon WRB

anyone?... Bueller?...

05-05-2003, 07:03 AM

sparks

Guest

Posts: n/a

I'm using the clock plug for my Greddy gauges. Works like a champ. Switched and constant power, light signal and a ground.

I used a 12V test light to verify the 4 wires.

The listing above is straight from the Wirinf diagram.

05-05-2003, 08:34 AM

SacWagon

Registered User

Join Date: Dec 2002

Location: Sacramento, CA

Posts: 179

Car Info: 2003 SRP WRX Wagon

i used the wires from the stereo harness per this digram from ravensblade

Pin Wire Color Function
1 Violet Radio Illumination Light +
2 Red/Yellow Right Front Door Tweeter/Speaker (+) (Brown/White at speaker)
3 Brown/White Left Front Door Tweeter/Speaker (+) (Red/Yellow at speaker)
4 Blue/Yellow Right Rear Door Speaker (+) (Blue/Yellow at speaker)
5 White/Red Left Rear Door Speaker (+) (Blue/Yellow at speaker)
6 Blue/Red Main Fuse Box, Fuse No. 2 (15A) (BATTERY - Continuous Power)
7 Orange/White Radio Illumination Light (-)
8 White/Black Right Front Door Tweeter/Speaker (-) (Green at speaker)
9 Green Left Front Door Tweeter/Speaker (-) (White/Black at speaker)
10 Yellow/Green Fuse & Relay Box, Fuse No. 9 (15A) (ACC - Switched Power)
11 Black Chassis Ground
12 Red/White Right Rear Door Speaker (-) (Red/White at speaker)
13 Red/Black Left Rear Door Speaker (-) (Red/White at speaker)
14 N/A Unused

i used pin1 for the gauge lights (violet)
pin 6 for the gauge power (blue / red)
pin 11 for ground (black)

mine works fine, sorry about the bad format for this post.. i just copied and pasted from
http://www.ravensblade-impreza.com/index1.html

hope that helps