Perrin Crank Pulley, Install Special!
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
Perrin Crank Pulley, Install Special!
Hey guys,
we got a lot of Perrin Crank Pulleys in!!!
We are now running an install special on these for local folks!!!
Made from 6061T6 aluminum and weighing in at 1.2lbs, the PERRIN™ pulley is more then 4 lbs lighter then the stock crank pulley. The PERRIN™ pulley is not under driven and will not affect the life of your engine. The pulley is a redesigned, lighter rendering of the stock crank pulley.
Aftermarket, under driven, pulleys are prone to charging and drivability problems from being excessively under driven. The PERRIN Performance™ lightened crank pulley will have no effect on your cars charging system.
The PERRIN Performance™ pulley achieves power and performance by reducing the rotating mass of the crank assembly.
That reduction is effectively the same as removing 100 pounds of weight from your vehicle. The PERRIN Performance™ pulley will not wear out engine bearings or the oil pump, and will not add any additional vibration or noise.
$129.99 FREE INSTALLATION!!!!!
However this is only good for 5spd WRX and 6spd STi only.
Automatic setup is extra.
Please give us to setup an appointment.
Thanks
Cal
we got a lot of Perrin Crank Pulleys in!!!
We are now running an install special on these for local folks!!!
Made from 6061T6 aluminum and weighing in at 1.2lbs, the PERRIN™ pulley is more then 4 lbs lighter then the stock crank pulley. The PERRIN™ pulley is not under driven and will not affect the life of your engine. The pulley is a redesigned, lighter rendering of the stock crank pulley.
Aftermarket, under driven, pulleys are prone to charging and drivability problems from being excessively under driven. The PERRIN Performance™ lightened crank pulley will have no effect on your cars charging system.
The PERRIN Performance™ pulley achieves power and performance by reducing the rotating mass of the crank assembly.
That reduction is effectively the same as removing 100 pounds of weight from your vehicle. The PERRIN Performance™ pulley will not wear out engine bearings or the oil pump, and will not add any additional vibration or noise.
$129.99 FREE INSTALLATION!!!!!
However this is only good for 5spd WRX and 6spd STi only.
Automatic setup is extra.
Please give us to setup an appointment.
Thanks
Cal
Last edited by Speed Element; Mar 22, 2006 at 05:39 PM.
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
Originally Posted by projectwhiterex
how much would u guys charge for just installing the perrin pulley since i own one already...thanks guys
anthony
anthony
$40
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
Originally Posted by KendallRS
How much for an install on an auto(if i buy from you)?
Installatoin for the crank pulley for an AUTO will be $75 Extra because we have to remove the radiator. and we'll flush the coolant.
Thanks
Devin
MPJ / SpeedElement
Originally Posted by MPJ Performance
Installatoin for the crank pulley for an AUTO will be $75 Extra because we have to remove the radiator. and we'll flush the coolant.
Thanks
Devin
MPJ / SpeedElement
Thanks
Devin
MPJ / SpeedElement
thanks
kendall
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
Originally Posted by KendallRS
Sounds good, as soon as i get a little money i will call you guys.
thanks
kendall
thanks
kendall
Cool... hope to hear from you soon
Registered User
Joined: Jun 2005
Posts: 99
From: bay area
Car Info: it has 4 wheels and it runs.
are you still only charging $40 for the install?
cuz i have one... but it needs to be installed. btw i have a '05 legacy NA. is the cost the same? or different?
do you have a slot avail on 6/2 or 6/3?
cuz i have one... but it needs to be installed. btw i have a '05 legacy NA. is the cost the same? or different?
do you have a slot avail on 6/2 or 6/3?
Thread Starter
Former Sponsor
iTrader: (39)
Joined: Nov 2002
Posts: 6,453
From: San Jose
Car Info: Evo X, 04 STI, 335i, Fit
please give us a call to schedule an appt.
thanks
MPJ/Speedelement
510-226-8822
thanks
MPJ/Speedelement
510-226-8822
Originally Posted by aldouse
are you still only charging $40 for the install?
cuz i have one... but it needs to be installed. btw i have a '05 legacy NA. is the cost the same? or different?
do you have a slot avail on 6/2 or 6/3?
cuz i have one... but it needs to be installed. btw i have a '05 legacy NA. is the cost the same? or different?
do you have a slot avail on 6/2 or 6/3?
Thread
Thread Starter
Forum
Replies
Last Post
demonbugeye
Hawaii Classifieds
4
May 4, 2009 03:26 AM
Speed Element
NorCal Classifieds
7
Feb 18, 2007 10:29 AM
Speed Element
Engine and Drivetrain
4
Feb 8, 2007 12:27 PM
Speed Element
NorCal Classifieds
6
Mar 30, 2006 10:39 AM
