VF37 twinscroll kit & 02-07 WRX/STI 5Zigen cbe
Thread Starter
Registered User
Joined: Jul 2003
Posts: 1,204
From: in your mommy's bung hole
Car Info: 04 Red Impreza, 84 Levin GT-SR5
VF37 twinscroll kit & 02-07 WRX/STI 5Zigen cbe
I have a few things for sale. I'm located in Cerritos or Long Beach and can meet up. Willing to ship but buyer covers all costs.
5Zigen Miracle Fireball catback. Lighter version of the regular Fireball cbe as the walls are 1mm thick and used hollowed hangers. Roughly weighs 15-16lbs which is near Ti exhaust system weight. Exhaust is a 2pc slip joint that connects at the axle. 3" diameter with a common jdm 2.5" taper at the dp. $300 obo



00-04 Outback rear hatch cover in dark gray. Excellent condition with no rips or tears. Not for Outback Sport, just standard Outback unless you can make it work. SOLD
Sparco blue/polished shift ****, weighted. SOLD
Added:
Decided to sell off my twinscroll kit since I figure I'm never going to get to it. This will bolt onto a 02-07 WRX/STI (02-05 WRX need a 2.5L oil pan) or on ej20/22/25 motors in Impreza, Legecy or Fozzy chassis. Get full boost around 2.5-3k and hold on with the amount of torque this kit adds. Not parting out unless I have committed buyers for everything. Parts are clean and ready to install. $1800




Specs & parts included:
Factory JDM twinscroll kit.
Under 10k on the kit, probably way less considering how clean the parts look.
VF37 turbo (no shaft play)
Exhaust manifold, U/P, D/P all w/ heat shields, nuts, and bolts.
Throwing in the following: IAG D/P water cut steel flange for a custom D/P
5Zigen Miracle Fireball catback. Lighter version of the regular Fireball cbe as the walls are 1mm thick and used hollowed hangers. Roughly weighs 15-16lbs which is near Ti exhaust system weight. Exhaust is a 2pc slip joint that connects at the axle. 3" diameter with a common jdm 2.5" taper at the dp. $300 obo



00-04 Outback rear hatch cover in dark gray. Excellent condition with no rips or tears. Not for Outback Sport, just standard Outback unless you can make it work. SOLD
Sparco blue/polished shift ****, weighted. SOLD
Added:
Decided to sell off my twinscroll kit since I figure I'm never going to get to it. This will bolt onto a 02-07 WRX/STI (02-05 WRX need a 2.5L oil pan) or on ej20/22/25 motors in Impreza, Legecy or Fozzy chassis. Get full boost around 2.5-3k and hold on with the amount of torque this kit adds. Not parting out unless I have committed buyers for everything. Parts are clean and ready to install. $1800




Specs & parts included:
Factory JDM twinscroll kit.
Under 10k on the kit, probably way less considering how clean the parts look.
VF37 turbo (no shaft play)
Exhaust manifold, U/P, D/P all w/ heat shields, nuts, and bolts.
Throwing in the following: IAG D/P water cut steel flange for a custom D/P
Thread Starter
Registered User
Joined: Jul 2003
Posts: 1,204
From: in your mommy's bung hole
Car Info: 04 Red Impreza, 84 Levin GT-SR5
Thread
Thread Starter
Forum
Replies
Last Post
ViperWRX
Subaru OEM Parts For Sale
8
Sep 30, 2010 09:12 PM
WrxWagon253
New Aftermarket Car Parts For Sale
1
Dec 30, 2008 08:55 PM
gruppe-s
NorCal Classifieds
0
Dec 14, 2004 02:58 PM




