SoCal: Gauging Interest: GGB Impreza Wagon STi Suspension
Thread Starter
VIP Member
iTrader: (2)
Joined: Mar 2004
Posts: 11,552
From: EALA
Car Info: Giant Bowery '84
SoCal: Gauging Interest: GGB Impreza Wagon STi Suspension
Just curious if anyone is interested on the Impreza Wagon STi Suspension. This setup feel so much better comparing to the stock wagon suspension. By better I mean, less roll when making turns as well as giving the drive a better feel in terms of directional response. Cornering is much better comparing to factory WRX wagon suspension. So who's interested on this very limited setup in the states? This setup lowers the ride height slightly (1/4 to 1/2 an inch; not for lowering but for better handling). Feel free to ask questions. The suspension is finally off my car. I've put down about another 1k on it. Anyhow, this setup includes everything you need (Strut tops, struts, and springs). There is no need to worry about missing parts since this is a complete take off of GGB. I am also a second owner of this setup and I've put down approximately 6000 ~ 7000 mi on them. They still perform perfectly. The take off consist of top hats, springs and struts. Like I mentioned, it's a direct bolt on. As far as shipping goes, the options are yours since buyer covers shipping unless its a local pick up (90012). Happy viewing.
Shipping Estimation:
Each Strut including top hat is around 24" ~ 32". All together approximately 80lbs ~ 100lbs.
Diameter, I would say about 5".
UPS Estimate
Shipping Estimation:
Each Strut including top hat is around 24" ~ 32". All together approximately 80lbs ~ 100lbs.
Diameter, I would say about 5".
UPS Estimate
Originally Posted by Without GGB V7 Suspension
Originally Posted by With GGB V7 Suspension
Originally Posted by GGB Take off Suspension
Last edited by hey1; Apr 18, 2006 at 03:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mykr
Cars For Sale
0
May 18, 2005 04:43 PM
