Parting out an ENTIRE GC8!! (Turbo & EMS)
08-22-2003, 03:27 PM
#1
Registered User
Thread Starter
Parting out an ENTIRE GC8!! (Turbo & EMS)
Its wrecked, but many parts remain. An 'almost' complete list of aftermarket parts can be seen HERE. I have all the stock parts minus the foglights and 2 stock RS wheels. It's all up for sale, Make offers. This is off a 1999 Subaru Impreza 2.5RS.
Big ticket Items (in full working order):
- Electromotive TEC-II, including all sensors (w/ a few spares), config maps, RC 550cc injectors, crank pulley, walbro high flow fuel pump, Vishnu fuel rails, in-line fuel pressure gauge, unused electromotive boost controller, and Magnacore ign. wires. Complete bolt on. [$2000]
- Vishnu Limited (Stage 4?) complete turbo kit. T3/04E turbo, all stainless mandrel bent piping, Tial 35mm wastegate, Tial 35mm BOV, all samco hoses, CUSCO oil catch can, huge K&N, manual boost controller, stainless power steering lines, Spearco 6x20" TMIC, 3" turbo back exhaust (New 3" high flow cat & magnaflow muffler). WELL Capable of applications above and beyond the 400hp realm. Should fit all impreza models '93 - '03 [$4000]
*** OR BUY BOTH TOGETHER FOR $5000 ***
- EJ25 incl. ECU & RS transmission (w/exedy clutch & 14lb flywheel), odo: 130k. compression tested and functional. [MAKE OFFER]
Will post pictures soon. Please reply here for more info, to purchase, please respond to awd_dan@supersleepers.com
Will ship to most northern California locations for FREE!
Big ticket Items (in full working order):
- Electromotive TEC-II, including all sensors (w/ a few spares), config maps, RC 550cc injectors, crank pulley, walbro high flow fuel pump, Vishnu fuel rails, in-line fuel pressure gauge, unused electromotive boost controller, and Magnacore ign. wires. Complete bolt on. [$2000]
- Vishnu Limited (Stage 4?) complete turbo kit. T3/04E turbo, all stainless mandrel bent piping, Tial 35mm wastegate, Tial 35mm BOV, all samco hoses, CUSCO oil catch can, huge K&N, manual boost controller, stainless power steering lines, Spearco 6x20" TMIC, 3" turbo back exhaust (New 3" high flow cat & magnaflow muffler). WELL Capable of applications above and beyond the 400hp realm. Should fit all impreza models '93 - '03 [$4000]
*** OR BUY BOTH TOGETHER FOR $5000 ***
- EJ25 incl. ECU & RS transmission (w/exedy clutch & 14lb flywheel), odo: 130k. compression tested and functional. [MAKE OFFER]
Will post pictures soon. Please reply here for more info, to purchase, please respond to awd_dan@supersleepers.com
Will ship to most northern California locations for FREE!
08-22-2003, 03:38 PM
#2
Guest
Posts: n/a
sorry to hear about your mishap. screw those a**hole biker guys(minus the ones that stopped of course)
what are you looking to get for your seatbelts-tails-and front bumper skin(if its not damaged too badly)
what are you looking to get for your seatbelts-tails-and front bumper skin(if its not damaged too badly)
08-22-2003, 03:57 PM
#3
Registered User
Thread Starter
which belts u need and i'll save em for you.
Only the driver side JDM tail is ok, but i have the stock ones in great condition
Front bumper skin is good besides some minor scrapes on the underside from curbs and such.
Only the driver side JDM tail is ok, but i have the stock ones in great condition
Front bumper skin is good besides some minor scrapes on the underside from curbs and such.
08-23-2003, 07:07 AM
#5
Guest
Posts: n/a
Originally posted by AWD_Dan
which belts u need and i'll save em for you.
Only the driver side JDM tail is ok, but i have the stock ones in great condition
Front bumper skin is good besides some minor scrapes on the underside from curbs and such.
which belts u need and i'll save em for you.
Only the driver side JDM tail is ok, but i have the stock ones in great condition
Front bumper skin is good besides some minor scrapes on the underside from curbs and such.
you can keep your stock tails, was looking for the JDM ones
and the scrapes are ok with me, as long as it isnt cracked too badly or just mangled
08-23-2003, 11:34 AM
#6
Guest
Posts: n/a
sorry about your loss, very interested in many parts, so. cal here could buy some of the smaller stuff . maybe work a package deal? have cash ready to go.
Kartboy Kustom Short Shifter & Bushings
MOMO Carbon Fiber Shift ****
Subaru JDM Red/Clear Rear Tail lights
Whiteline 18-22mm Adjustable Rear Sway Bar
Whiteline Anti-lift control arm mounts
Cusco Carbon Fiber rear strut tower brace
Adjustible rear camber bolts
Primitive Racing Lightweight Flywheel (13.9lbs)
Exedy Organic racing clutch
intersted in turbo but can't buy now
Kartboy Kustom Short Shifter & Bushings
MOMO Carbon Fiber Shift ****
Subaru JDM Red/Clear Rear Tail lights
Whiteline 18-22mm Adjustable Rear Sway Bar
Whiteline Anti-lift control arm mounts
Cusco Carbon Fiber rear strut tower brace
Adjustible rear camber bolts
Primitive Racing Lightweight Flywheel (13.9lbs)
Exedy Organic racing clutch
intersted in turbo but can't buy now
08-24-2003, 06:45 AM
#7
Registered User
Join Date: Jul 2003
Location: NH
Posts: 322
Car Info: 09 WRX Sedan };-)>
i might want that turbo would you take a trade
???????/
???????/
08-25-2003, 09:38 AM
#8
Registered User
Thread Starter
Trade would have to be of equal or greater value. It really is an incredible kit. I think Jesse James (of WCC) would be jealous of these welds 
805 - I've been getting that exact list emailed from about 3-4 other folks. will keep you posted if there are flakers.
EJ25 - front driver side shock is hosed. the rest are good, and all the springs are good.
RotaryPowaa - Please email me: awd_dan@supersleepers.com so i can send u pix of the bumper. would love to get rid of it.
805 - I've been getting that exact list emailed from about 3-4 other folks. will keep you posted if there are flakers.
EJ25 - front driver side shock is hosed. the rest are good, and all the springs are good.
RotaryPowaa - Please email me: awd_dan@supersleepers.com so i can send u pix of the bumper. would love to get rid of it.
08-27-2003, 06:20 PM
#10
Guest
Posts: n/a
sorry to hear about your loss. the car looked great on your website.
Very Interested in the clear side makers and bumper lights. im NOR CAL as well. maybe we can arrange a pick up. also, can you email me pictures of the CF dash at
Phatxjigga@aol.com
thanks a lot.
Very Interested in the clear side makers and bumper lights. im NOR CAL as well. maybe we can arrange a pick up. also, can you email me pictures of the CF dash at
Phatxjigga@aol.com
thanks a lot.
08-27-2003, 10:29 PM
#11
Registered User
Thread Starter
CF dash has been sold, and only have the clear turn signal indicators that go on the bumper.
*** Will be posing pictures of parts requested on thursday... hopefully ***
*** Will be posing pictures of parts requested on thursday... hopefully ***
08-30-2003, 09:23 AM
#13
Guest
Posts: n/a
Do you still have the side skirts from your car or were those damaged? If anything I just need a passenger side.
09-02-2003, 01:59 PM
#14
Registered User
Thread Starter
Parts pix added...
http://www.supersleepers.com/gallery/gallery/album01
will try to get more next weekend. I live 2 hours from where the car is so i can really only make it out there on weekends.
http://www.supersleepers.com/gallery/gallery/album01
will try to get more next weekend. I live 2 hours from where the car is so i can really only make it out there on weekends.
09-04-2003, 11:41 AM
#15
Registered User
Join Date: Jul 2003
Location: Jersey Shore
Posts: 37
Car Info: MY2000 RS cpe Sedona Red
Are you selling the shift boot?
- WRX_REED
The boy blunder
- WRX_REED
The boy blunder